For Better Performance Please Use Chrome or Firefox Web Browser

International Conference Papers

IV International Conference Papers
• M. ASKARI, K. RAEISSI, M. A. GOLOZAR Investigation of pitting corrosion of carbon steel in rich digycolamine units Book of abstracts of The 1st International Corrosion Congress and 10th National Iranian Corrosion Congress (ICIC2007), 14-17 May, 2007. Tehran Iran
• SH. HASANI, K. RAEISSI, M. A. GOLOZAR Saccharin effect on Ni/Co nanocrystalline electrodepositedcoatings Book of abstracts of The 1st International Corrosion Congress and 10th National Iranian Corrosion Congress (ICIC2007), 14-17 May, 2007. Tehran Iran
• A. ASHRAFI, M. A. GOLOZAR , S. MALLAKPOUR, Corrosion Investigation of Polypyrrole-Coated Mild Steel Using Electrochemical Impedance Spectroscopy, Book of abstracts of The 1st International Corrosion Congress and 10th National Iranian Corrosion Congress (ICIC2007), 14-17 May, 2007. Tehran Iran
• H. ASGARI, F. ASHRAFIZADEH, M. R. TOROGHINEJAD, M. A. GOLOZAR, K. RAEISSI Effect of texture on corrosion resistance of hot-dip galvanized coatings Proceeding of the 13th International Metallurgy-Materials Congress, pp. 494-501, 09-11 November 2006 Istanbul, Turkey
K. KARIM DEHNAVI, M. GHARAAT, M. A. GOLOZAR, H. NAJJAR AZARI, Effect of thermomechanical treatment on mechanical properties and stress corrosion cracking behavior of cast ingot of 7075 aluminum alloy CD of The 14th annual (International) Conference of Mechanical Engineering (ISME2006), Also book of abstracts, p.231, Isfahan, Iran, 16-18 May, 2006.
H. ASGARI, M.R. TOROGHINEJAD, M. A. GOLOZAR, F. ASHRAFIZADEH AND K. RAEISSI The Role of (00.2) Basal Texture Component and Morphology in Modifying the corrosion resistance of hot-dip galvanized zinc coatings, Proceeding of the 45th Annual Conference of Metallurgists of CIM, pp.229-241, Montreal, Quebec, Canada


A. ASHRAFI, S. MALLAKPOUR, and M. A. GOLOZAR Replacement of chromate Conversion Coating with Polypyrrole for Corrosion Control on Aluminum 7075 Surface CD of The 14 th International Seminar on Polymer Science and Technology (ISPST 2005), Also book of Abstracts, p 268, Tehran, Iran, September 27-29, 2005
A. ASHRAFI, S. MALLAKPOUR, and M .A GOLOZAR Effect of Substrate Pretreatment on Morphology of Polypyrrole Coating on 316L Stainless Steel Ibid, CD and Book of Abstracts, p. 274
M. A. GOLOZAR, J. MOSTAGHIMI, T. COYLE, and R. SOLTANI Wear and Tribological properties of Air Plasma Sprayed Nano and Conventional Zirconia Coatings CD of 17th International Symposium on Plasma Chemistry, (also Book of Extended Abstracts pp. 996-997) August 7th –12th, 2005, Toronto, Canada.
M.A. GOLOZAR, J.MOSTAGHIMI, T. COYLE, and R. SOLTANI Wear Behavior of Nanostructured and Conventional Y-PSZ Coatings Proceedings of CIM, COM 2005, Calgary, Canada August 21st-24th, 2005, pp. 273-285
A. GHASEMI, F. ASHRAFIZADEH, and M. A. GOLOZAR Effects of Alumina Silica Sol-Gel Coating on the Hot Corrosion and Static Oxidation Resistance of Nickel Substrates Ibid, pp. 449-458
A. ASHRAFI, M. A. GOLOZAR, and S. MALLAKPOUR Effect of Substrate Pretreatment on Corrosion Resistance of Polypyrrole Coated Aluminum Alloy 7075 Ibid, pp. 477-485
M. A. GOLOZAR, J. MOSTAGHIMI, and T. COYLE Partially Stabilized Zirconia (8wt%Y2O3-ZrO2), a Wear Resistant Thermal Barrier Coating, 13th CD of Annual (International) Mechanical Engineering Conference, Isfahan University of Technology, Isfahan Iran. May 2005, Also, Book of Abstracts
A. ASHRAFI, M.A. GOLOZAR, S. MALLAKPOUR, and A. GHASEMI Effects of Pyrrole and N-Methylpyrrole Coatings on Corrosion Resistance of Mild Steel Transactions of Materials and Heat Treatment, Proceedings of the 14th IFHTSE Congress, China, Vol.25, No. 5, October 2004, PP. 1138-1141


A. GHASEMI, F. ASHRAFIZADEH, M.A. GOLOZAR, , and A.ASHRAFI Effect of Catalyst on the Formation of Silica Coating on Nickel Substrate by Sol-Gel Processing Ibid, pp. 1295-1298.
K. RAEISSI, A. SAATCHI, and M. A. GOLOZAR Electrochemical Variable Dependence of Zinc Electrodeposited onto Electropolished Steel Substrate Proceedings of the International Symposium on Environmental Degradation of Materials and Corrosion Control in Metals, 42nd Annual Conference of Metallurgist of CIM, August 24-27, 2003, Vancouver, Canada, pp. 71-83
A. ASHRAFI, M. A.GOLOZAR, and S. MALLAKPOUR Electropolymerized Coating of Pyrrol and Methylpyrrole on Mild Steel Surface Ibid, pp. 545-554
R. MOZAFFARINIA, F.ASHRAFIZADEH, M.A.GOLOZAR and A. GHASEMI SiO2/SiO2-ZnO Optical Multylayer Coatings Fabricated by Sol-Gel Method. Proceedings of the International Symposium on Ecomaterials and Ecoprocesses, Ibid, pp. 113-122
M. FAZEL NAJAFABADI and M. A. GOLOZAR In Situ Production of Al-TiC Composites by Reactive Slag Process, Proceedings of 3rd International Conference on Composite Science and Technology, 21-23 January 2003, Durban, South Africa
A. R. KIANI RASHID, and M.A. GOLOZAR The Microsegregation Pattern of Aluminum and Silicon in the Matrix Microstructure of the Nodular Cast Iron 17th International Congress on X-Ray Optics and Microanalysis, ICXOM XVII Congress, 22-26 September 2003, Chamonix, France
R. BAGHERI and M. A. GOLOZAR Adhesion of Polyethylene to Carbon Steel: Study of Effective Parameters Proceedings of EURADH 2002, 6th European Adhesion Conference and ADHESION’02, 8th International Conference On the Science and Technology of Adhesion and Adhesives, 10-13 September 2002, University of Strathclyde, Glasgow, UK, pp.363-366
M. A. GOLOZAR, SH. MALLAKPOUR, and A. ASHRAFI Production and Characterization of Copolymer Coatings of Pyrrol and Methylpyrrole On Mild Steel, Produced by Electropolymerization from T4SNa Aqueous Solution


UK CORROSION 2002, 22-24 October 2002, Wales, UK.
• V.MORTAZAVI, M.H.FATHI, and M. A. GOLOZAR The Effect of Clinical Procedures on the Surface Characteristics and Corrosion Behavior of High Copper Dental Amalgam Proceedings of CIM, COM 2002, August 11-14, 2002, Montreal, Quebec, Canada
M FAZEL NAJAFABADI, M. A. GOLOZAR, A. SAIDI, H.EDRIS Microstructural Characterization and Wear Behaviour of Aluminum Matrix TiB2 Composite, Prepared by In-situ Processing MMC VIII, Metallic Composites and Foams, 26-27 November 2001, The Institute of Materials, London, UK
H. N. AZARI and M. A. GOLOZAR Microstructural Characterization of D.C. Cast High Strength 7075 Aluminum Alloy Proceedings of the First International & Third Bi-Annual National Conference of the Iranian Aerospace Society, Sharif University of Technology, Tehran, Iran, 29 Dec.2000-1Jan.2001
H. N. AZARI and M. A. GOLOZAR Microstructural Characterization of 7075 High Strength Aluminum Alloy Ibid, Book of Abstracts
M. A. GOLOZAR and R.BAGHERI Fluidized Bed Powder Coating of High-Density Polyethylene on Plain Carbon Steel Book of Abstract, 5th International Symposium on Advanced Materials, Islamabad, Pakistan, September 21-25, 1997, p.14
M. A. GOLOZAR Optimizing Toughness and Wear Resistance of 70Cr2 Steel For Grinding Balls, Using Heat Treatment Book of The Abstracts, 36th Annual Conference of Metallurgist and 27th Annual Hydrometallurgical Meeting of CIM, Sudbury, Ontario, Canada, Laurentian University, August, 17-20, 1997, p. 112.
M. A. GOLOZAR and R. BAGHERI Spray Electrostatic Powder Coating of High-Density Polyethylene on Plain Carbon Steel Proceedings of The International Symposium on Materials Solutions for Environmental Problems, 36th Annual Conference of Metallurgist of CIM, Sudbury, Ontario, Canada August, 17-20, 1997, pp. 189-199.


A. SAIDI, M. A. GOLOZAR, and J.L.F. KELLIE Combustion Synthesis of Fe-TiC and Fe-(W,Ti)C Composite Proceedings of The International Symposium on Thermomechanical Processing and Metallurgy of Titanium Alloys, Australia, July, 1997
M. A. GOLOZAR Morphological Aspects of Diamond/Diamond-Like Coatings, The Role of Substrate Materials and Substrate Surface Treatments Proceedings of the 3rd International Scientific-Technological Conference on Influence of Production Engineering, a State of Surface Layer-SL96, Poland, October 16-18, 1996
A.SAATCHI, M. A. GOLOZAR, and R. MOZAFFARINIA Evaluation of Aluminum Alloy 5083 Weldments to Stress Corrosion Cracking in Sea Water Proceedings of The Second Arabian Corrosion Conference, Kuwait, October 12-15,1996, pp. 301-307
M. A. GOLOZAR, A. SAATCHI, and M. A. SOLTANI Fatigue Behaviour of Case Hardened Cr-Mo Steel Proceedings of the 10th Congress of the International Federation for Heat treatment and Surface Engineering, Brighton, UK, September 1-5, 1996.
M. A. GOLOZAR Deposition of Diamond on Stainless Steels Using Combustion Flame Technique Proceedings of The Fifth World Seminar on Heat Treatment and Surface Engineering, IFHT'95, Isfahan, Iran, September 26-29, 1995, pp. 427-432
A. NAJAFIZADEH and M. A. GOLOZAR Influence of Chemical Composition on The Strength of Austempered Ductile Iron Alloys Proceedings of The 10th International Conference on the Strength of Materials, The Japans Institute of Metals, Japan, 1994, pp. 229-332
M. A. GOLOZAR and M.H. FATHI Corrosion of Dental Amalgams in Solutions of Sodium Chloride and Sodium Sulfide Corrosion Asia, The Second NACE Asian Conference, Singapore, September 26-30, 1994, Paper No. 1057
M. A. GOLOZAR and A. NAJAFIZADEH Aqueous Corrosion of AL-Cu-Ni Ductile Iron Alloys Ibid, Paper No. 1056


M. A. GOLOZAR and A. SAATCHI Corrosion and Stress Corrosion Cracking of a Marine Steel in Artificial and Natural Sea Water Proceedings of The NACE International Corrosion Conference, Texas, USA, 1993, pp. 3660- 3670
M. A. GOLOZAR and A.M. SHAHHOSSEINI Forged and Direct Quenched Ti-Microalloyed Steel, the Mechanical Properties and Fracture Mode Proceedings of the Forth International Seminar, Environmentally and Energy Efficient Heat Treatment Technologies, International Federation for Heat Treatment and Surface Engineering (IFHT), Beijing, China, September 15-17, 1993, pp. 138-147
A. NAJAFIZADEH and M. A. GOLOZAR Effects of Chemical Composition on The Microstructural Evolution and Mechanical Behaviour of Austempered Ductile Iron Extended Abstract, Ibid, pp. 458-459
M. A. GOLOZAR and A. NAJAFIZADEH The Microstructure and Properties of Isothermally Transformed Nodular Cast Iron Alloys Extended Abstract, Ibid, p. 457
A. SAATCHI and M. A. GOLOZAR Marine Corrosion Survey in Persian Gulf and Caspian Sea Water Proceedings of The First NACE Asian Corrosion Conference, Corrosion Asia, Singapore, September 7-11, 1992, Paper No. 1141
M. A. GOLOZAR and A.R. RIAHI Blistering Phenomenon in Zirconium and Zirconium alloys Advances in Corrosion and Protection, A Conference to Recognize The 20th Anniversary of The Corrosion and Protection Center, UMIST, UK, 26th June -3rd July, 1992
M. A. GOLOZAR, I. R. McCOLL, D.M.GRANT and J.V.WOOD Combustion Flame Grown Diamond Films Second European Conference on Diamond, Diamond-Like and Related Coatings, Nice, France September 2-6, 1991, pp. 262-269
D.M.GRANT, I.R. McCOLL, M. A. GOLOZAR, J.V. WOOD, and N. St. BRAITHWAITE Plasma Assisted CVD for Biomedical Applications


Ibid. pp. 727-730
P. MAJUMDAR, M. A. GOLOZAR, and J.C. SCULLY Stress Corrosion Crack Propagation in Zircalloy-2 in CH3OH/HCl Proceedings of The Third International Conference on the Effect of Hydrogen on Behaviour of Materials, Jackson Lake Lodge, Wyoming, August 1980, pp. 881-889
V National (Farsi) Conference papers;
S. HASANI, K. RAEISSI, M.A. GOLOZAR, Corrosion behavior of electrodeposited nanocrystalline Ni/Co coating in 3.5wt% NaCl solution CD's and Book of abstracts of the 11th Annual Conference of the Iranian Metallurgical Engineering Society and 19th Annual Conference of the Iranian Foundryman Society, 23-25 Oct., 2007, Isfahan Steel Mill, Isfahan, Iran
A. FATTAHOLHOSEINI, M.A. GOLOZAR, A. SAATCHI, K. RAEISSI, Investigation of passive layer on 316L stainless steel using EIS, CD's and Book of abstracts of the 11th Annual Conference of the Iranian Metallurgical Engineering Society and 19th Annual Conference of the Iranian Foundryman Society, 23-25 Oct., 2007, Isfahan Steel Mill, Isfahan, Iran
A. FATTAHOLHOSEINI, A. SAATCHI, M.A. GOLOZAR, K. RAEISSI, Effect of surface roughness on corrosion resistance of passive layer CD's and Book of abstracts of the 11th Annual Conference of the Iranian Metallurgical Engineering Society and 19th Annual Conference of the Iranian Foundryman Society, 23-25 Oct., 2007, Isfahan Steel Mill, Isfahan, Iran
A. MOSTAED, K. RAEISSI, S. HASANI, M.A. GOLOZAR, Corrosion of steel in armed concrete in 3.5%NaCl aqueous solution CD's and Book of abstracts of the 11th Annual Conference of the Iranian Metallurgical Engineering Society and 19th Annual Conference of the Iranian Foundryman Society, 23-25 Oct., 2007, Isfahan Steel Mill, Isfahan, Iran
Z. NIKSERESHT, M.A. GOLOZAR, F. KARIMZADEH Localized corrosion in weld metal of 6061 aluminum alloy CD's and Book of abstracts of the 11th Annual Conference of the Iranian


Metallurgical Engineering Society and 19th Annual Conference of the Iranian Foundryman Society, 23-25 Oct., 2007, Isfahan Steel Mill, Isfahan, Iran
S. VAHHABZADEH, F. ASHRAFIZADEH, M.A. GOLOZAR, A. GHASEMI Microwave and microstructure properties of Zr0.8Sn0.2TiO4 modified by CuO CD's and Book of abstracts of the 11th Annual Conference of the Iranian Metallurgical Engineering Society and 19th Annual Conference of the Iranian Foundryman Society, 23-25 Oct., 2007, Isfahan Steel Mill, Isfahan, Iran
A. AKHBARIZADEH, A. SHAFYEI, M.A. GOLOZAR, M. KHOLGHI Effect of retained austenite stabilizing in subzero quenching on mechanical and wear properties of 1.2436 steel CD's and Book of abstracts of the 11th Annual Conference of the Iranian Metallurgical Engineering Society and 19th Annual Conference of the Iranian Foundryman Society, 23-25 Oct., 2007, Isfahan Steel Mill, Isfahan, Iran
S. HASANI, K. RAEISSI, M.A. GOLOZAR, Investigation of texture and morphology of nanocrystalline Ni/Co electrodeposits, Proceeding of The 2nd student congress of Nanotechnology, 5-7 Sep.2007, Kashan University, kashan, Iran.
M. FEIZMANDIAN, M.A. GOLOZAR, F. KARIMZADEH, Effect of electrodeposition current on wear behavior of nanocrystalline nickel coatings, Book of abstract of The 8th National Seminar on Surface Engineering and Heat Treatment, 8-9 May 2007, Shahid Bahonar University of Kerman, Kerman, Iran.
O. MOHAJER, K. RAEISSI, A. SAATCHI, M.A. GOLOZAR, Investigation of electrodeposited nanocrystalline nickel coatings using EIS, Book of abstract of The 8th National Seminar on Surface Engineering and Heat Treatment, 8-9 May 2007, Shahid Bahonar University of Kerman, Kerman, Iran.
S. HASANI, K. RAEISSI, M.A. GOLOZAR, Effect of saccharin and current density on electrical deposition of nanocrystalline Ni/Co on mild steel, Proceeding of steel symposium 85, 27-28 Feb, 2007, pp.663-670, Amirkabir University of Technology, Tehran,


N. ATTARZADEH, A. ASHRAFI, K. RAEISSI, M.A. GOLOZAR, S. MALLAKPOUR, Investigation of saccharin addition on improving corrosion resistance of mild steel coated with electropolymerized pyrrole, Proceeding of steel symposium 85, 27-28 Feb, 2007, pp.743-752, Amirkabir University of Technology, Tehran,
H. ASGARI, M. TOROGHI-NEZHAD, M.A. GOLOZAR, S. ABBASI, Effect of production parameters on texture, corrosion behaviour and thickness of alloy layers thickness of hot dip galvanized coating, Proceeding of steel symposium 85, 27-28 Feb, 2007, pp.753-762, Amirkabir University of Technology, Tehran,
M. ASKARI, M.A. GOLOZAR, K. RAEISSI, Corrosion of A516 Gr60 steel in Rich DGA solution riched by hydrogen sulfide gas, Proceeding of steel symposium 85, 27-28 Feb, 2007, pp.811-821, Amirkabir University of Technology, Tehran,
M. FEIZMANDIAN, M.A. GOLOZAR, F. KARIMZADEH, K. RAEISSI, Mechanism of texture formation in nanocrystalline nickel electroforming, Proceeding of the first Conference on Nanotechnology, South Region of Iran, Feb.2007, Shiraz University, Iran
S. TAHAMTAN, M.A. GOLOZAR, F. KARIMZADEH, B. NIROMAND, Mechanical Properties of semisolid alloy A356 formed using thixoforming method, Book of abstracts of 10th Annual Congress of Iranian Metallurgical Engineers Society, 14-15 Nov, 2006, p.156, Ferdowsi University of Mashhad, Mashhad, Iran.
A. FADAVI BOOSTANI, F. KARIMZADEH, B. NIROMAND, M.A. GOLOZAR, Mechanical Properties of thixoformed alloy A356 produced using SIMA method, Book of abstracts of 10th Annual Congress of Iranian Metallurgical Engineers Society, 14-15 Nov, 2006, p.156, Ferdowsi University of Mashhad, Mashhad, Iran.
M. FEIZMANDIAN, M.A. GOLOZAR, F. KARIMZADEH, Effect of applied current density on morphology and texture of electroformed nickel, Book of abstracts of 10th Annual Congress of Iranian Metallurgical Engineers Society, 14-15 Nov, 2006, p.156, Ferdowsi University of Mashhad, Mashhad, Iran.


M. ASKARI, K. RAEISSI, M.A. GOLOZAR, Investigation of mild steel corrosion in DEA and DGA solutions in sour gas sweetening process, Book of abstracts of 10th Annual Congress of Iranian Metallurgical Engineers Society, 14-15 Nov, 2006, p.156, Ferdowsi University of Mashhad, Mashhad, Iran.
Z. NIKSERESHT, F. KARIMZADEH, M.A. GOLOZAR, A. TAHVILIAN, Corrosion behavior of 6061 aluminum alloy weld metal in sodium chloride solution, Book of abstracts of 10th Annual Congress of Iranian Metallurgical Engineers Society, 14-15 Nov, 2006, p.156, Ferdowsi University of Mashhad, Mashhad, Iran.
H. ASGARI, M. TOROGHI-NEZHAD, M.A. GOLOZAR, S. M. NAVABI, S. ABBASI, Effect of production parameters on texture, corrosion behavior and alloy layers thickness of hot dip galvanized coating, Book of abstracts of 10th Annual Congress of Iranian Metallurgical Engineers Society, 14-15 Nov, 2006, p.156, Ferdowsi University of Mashhad, Mashhad, Iran.
H. ESKANDARY, H. EDRIS, and M.A. GOLOZAR Tribological Behavior of Heat Treated High Chromium White Cast Iron Containing Niobium, Proceedings of steel Symposium 84, 28 Feb-1March, 2006, pp. 681-693. Isfahan University of Technology, Isfahan, Iran.
H. KHABBAZI, R. BAGHERI, M. A. GOLOZAR, Adhesion and corrosion resistance of Co(propylene-ethylene) powder coated steel using electrostatic spray system, Proceeding of the 10th National Congress of Chemical Engineers of Iran,pp.4960-4970, 2005 University of Sistan & Baluchestan, Iran
H. ESKANDARI, H.EDRIS and M.A. GOLOZAR,
The Effects of Niobium and Heat Treatment on the Wear and Mechanical Properties of High Chromium White Cast Iron,
Proceedings of the 9th Congress of the Iranian Metallurgical Society, 15-16 November 2005, pp.453-462, Shiraz University, Iran
J. SALEHI, H. DEHAGHIN, F. ASHRAFIZADEH, and M.A. GOLOZAR
The Effect of Plasma on the Lubrication Mechanism of PVD Lead Coatings
Ibid pp. 824-832.


O. MIRZAEE, M.A. GOLOZAR, and A. SHAFYEI
The Role of Interface Energies in the Final Sintering of Ni-Zn Soft Ferrites,
Ibid pp. 1773-1784
J. SALEHI, H. DEHAGHIN, F. ASHRAFIZADEH, and M.A. GOLOZAR Role of Plasma and its Intensity on the Lubrication of CVD Pb Coatings, CD of 6th National Surface Engineering & Heat Treatment Congress, Isfahan University of Technology, Isfahan, Iran, 9-10 May, 2005
H.ESKANDARY, H. EDRIS, M. FOULADGAR, and M.A. GOLOZAR Investigation of Three Body Abrasive Wear of Heat Treated High Chromium White Cast Iron Containing Niobium Ibid.
H. KHABBAZI, R. BAGHERI, and M.A. GOLOZAR Ductility and Adhesion of Modified Co-polymer Propylene-Ethilen Powder Coating Produced on Steel Substrates Using Electrostatic Spraying Ibid.
A.ASHRAFI, M.A. GOLOZAR, and S. MALLAKPOUR Using Polypyrrole as Corrosion Resistance Coating for 7075 Aluminum Alloy Substrates Ibid.
A.ASHRAFI, M.A. GOLOZAR, and S.MALLAKPOUR Coating of Aluminum Alloy 7075 with Polypyrrole as a Conductive Polymer Using Cyclic Voltammetry Proceedings of the 9th National Corrosion Congress, Isfahan, Iran, 2-3 May 2005, pp. 134-141
M. MOSTAJERAN and M.A. GOLOZAR Investigation of Stress Corrosion Cracking Mechanism of as Cast 7075 Al Alloy Using Slow Strain Rate Tension Test Ibid. pp. 258-269
A.ASHRAFI, M.A. GOLOZAR, and S. MALLAKPOUR Nucleation and Growth of polypyrrole Coating on Pretreated Aluminum Alloy 7075 CD of Abstracts, 11th Seminar of Organic Chemistry, Isfahan University of Technology, Isfahan, Iran, 1-3 february 2005


K.KARIM DEHNAVI, M.A.GOLOZAR, and H.N.AZARI Effect of Heat Treatment and Thermomechanical Treatment on the SCC of High Strength 7075 Aluminum Alloy Proceedings of Iranian Aluminum Congress, Iran University of Science and Technology, Tehran, Iran, 6-7 December 2004, pp. 631-642
R. RAIESSI, A. SAATCHI, M. A. GOLOZAR, J.A.SZPUNAR Role of Epitaxial Growth on the Texture Development of Zinc Electrodeposited Coatings Proceedings of the 8th Annual Congress of Metallurgical Society of Iran, Isfahan University of Technology, Isfahan, Iran, 12-13 October 2004, pp.21-30
H.ESKANDARI, H.EDRIS, M.A.GOLOZARA.SHAFIEY Effect of Niobium on the Mechanical Propertied of High Chromium White Cast Iron Ibid, pp. 1323-1330
A.GHASEMI, F.ASHRAFIZADEH, M.A.GOLOZAR,and B.A.MOGHADAM Development of Sol-Gel Process to Produce Silica Film by Spin Method Proceedings of 7th Congress of Metallurgical Engineering Society of Iran, Sharif University of Technology, Tehran, Iran, 12-14 October 2003, pp. 139-147
K. RAEISSI, A.SAATCHI, and M.A.GOLOZAR, Effect of Cathodic Polarization on the Morphology and Texture of Electrodeposited Zinc Coatings Proceedings of the 5th National Surface Engineering and Heat Treatment Congress, Amir Kabir University of Technology, 13-14 May, 2003, Tehran, Iran, pp.62-70
R. MOZAFFARINIA, F,ASHRAFIZADEH, M.A.GOLOZAR, A.GHASEMI Evaluation of Optical Properties of Multylayer Coatings of SiO2/SiO2-ZnO Produced by Sol-Gel Method Ibid, pp. 414-424
A.GHASEMI, F,ASHRAFIZADEH, M.A.GOLOZAR, and R.MOZAFFATINIA Effect of Catalyst on the Formation of Silica Coating on Nickel Substrate, Using Sol-Gel Technique Ibid, pp. 425-434
M.GHASEMI, F.ASHRAFIZADEH,and M. A. GOLOZAR Optimization of Effective Parameters on the Alumina-Silica Coatings Produced by Sol-Gel Method Proceedings of the 6th Annual Congress of Metallurgical Society of Iran, Iran University of Science and Technology, pp. October 2002


• A. ASHRAFI, M. A. GOLOZAR, and SH. MALAKPOOR Corrosion Characteristics of Steel Substrates Coated by Polypyrrole Using Electropolymerization from T4Sna Aqueous Solution Proceedings of the Annual Chemical Engineering Conference, Tehran University, Iran, November 2002
K.KARIMDEHNAVI, M. A. GOLOZAR and H.NAJAR-AZARI Effects of Heat Treatment and Thermo-Mechanical Treatment on the Mechanical Properties of 7075 Aluminum Alloys “MATFORM’81” 1st Conference of Metal Forming, Department of Engineering and Materials Science, Sharif University of Technology, Tehran, Iran, 8-10 May 2002, pp 363-369
M.A.GOLOZAR, M.MERATIAN, and S. NOSOUHIAN Effect of Solidification Conditions on the Microstructure of Cast Aluminum Alloys Produced by Directional solidification, Proceedings of the 13th Annual Seminar of Iranian Foundrymen’s Society, Iran University of Science and Technology, Tehran, Iran, 17-19 June 2001, pp. 153-162
M. FAZEL NAJAFABADI, M. A. GOLOZAR Evaluation of Stress Corrosion Cracking of Al-TiB2 Composite, Using Slow Strain Rate Tests Proceedings of the 5th Annual Congress Metallurgical Society of Iran, Amir Kabir University of Technology, IRAN, 6-7 November 2001, pp. 479-486
M.MOSTAJERAN, M. A. GOLOZAR Evaluation of Diffusible Hydrogen in 7075 Aluminum Alloy, Using Glycerin Displacement Method Ibid, pp. 501-510
F.ALAVI NAINI, M. A. GOLOZAR, and K.RAEISSI Pitting Corrosion of Pure Aluminum and Al-TiB2 Composite in 1M NaCl Solution Ibid, pp. 487-499
A.BEHROOZNIA, A.SAIDI, and M. A. GOLOZAR Nonmetallic Inclusions Produced during Manufacturing Process of Hot-work Tool Steel Proceedings of the 3rd Steel Symposium, Ahwaz, Iran, 21-22 February 2001, pp. 55-64
E.ROOHANI, A.SAATCHI, and M. A. GOLOZAR Hydrogen Embrittlement of API Steel in Environments Containing H2S, Using an


Artificial Solution Ibid, pp. 699-710
M.FAZELNAJAFABADI and M. A. GOLOZAR Production of Al-ZrB2 Composite Using Reactive Slug Proceedings of the 4th Annual Congress of Metallurgical Society of Iran, Faculty of Engineering, University of Tehran, Tehran, Iran, Oct. 16-18, 2000, pp. 495-502
SH. SAMANIAN, M.KARAMINEJAD, and M. A. GOLOZAR Premature Failure of Preheating Water Tubes in High Pressure Boilers Ibid, pp. 743-752
M.MOSTAJERAN, M. A. GOLOZAR, M.MONAZAH, and H.N.AZARI An Investigation on the Effect of Heat Treatment on Localized Corrosion of 7075 Aluminum Alloy Ibid, pp. 679-689
M.MONAZZAH, H. N. AZARI and M. A. GOLOZAR Effect of homogenizing Treatment on the Age Hardening Behaviour of 7075 D.C. Cast Aluminum Alloy Proceedings of the 2nd Metallurgical Congress of Non Ferrous Alloys, University of Shahid Bahonar, Kerman, Iran, May, 9-11, 2000, pp. 723-730
R.AGHATAGHI, M. A. GOLOZAR, and A. SATCHI Optimizing the bath Conditions for Electroplating of Zn-Ni Coatings Using Interrupted Current Ibid, pp. 1101-1110.
SH.SHOJAEIEH, M.KARAMINEJAD, and M. A. GOLOZAR An investigation on the Properties of Electroplated Zn-Ni Coatings Produced by Interrupted Current Ibid, pp. 1007-1014
M.FAZELNAJAFABADI and M. A. GOLOZAR Corrosion Behaviour of Al-TiB2 Composite Ibid, pp. 803-811
M. FAZEL NAJAFABADI and M. A. GOLOZAR Production of Al-TiB2 Composite Using Reactive Slug Proceedings of the 11th Annual Seminar of Iranian Foundrymen Society, Faculty of Engineering, Tehran University, Tehran, Iran, June 12-15, 2000, pp. 211-219
S. H. SHOJAEIEH, M. KARAMINEJAD, and M. A. GOLOZAR Optimizing the Electroplating Bath Conditions for Zn-Ni Coatings


Proceedings of the 3rd Annual Seminar of Surface Engineering, Tehran, Iran, Nov. 7-9, 1999, pp. 153-162
M. H. FATHI, M. A. GOLOZAR, and M. KHOLGHI Economical and Metallurgical Comparison of Corrosion Resistance Coatings for Automotive Industry Ibid, pp. 209-216
E. ROOHANI, M. A. GOLOZAR, A. SATCHI, and S. M. MONIRVAGHEFI
Using an Artificial Condition to Study the Corrosion Resistance of API Steel in a Sour Environment Proceedings of the 3rd Annual Congress of Metallurgical Society of Iran, 2nd Vol. Isfahan university of Technology, Isfahan, Iran, October 18-20, 1999, pp. 363-372
A. BEHROOZNIA, A. SAIDI, and M. A. GOLOZAR ESR Process and Effect of Refining on the Inclusions of Hot Work Tool Steels Ibid, 1st Vol. pp. 99-108
M.ETESAMI, R.BAGHERI, and M. A. GOLOZAR Production of Polyethylene powder Coating Having Good Mechanical and Chemical Properties on Plain Carbon Steel Ibid, pp. 497-505
M.H. FATHI, V. MORTAZAVI, and M. A. GOLOZAR Role of Metallurgical Methods on the Investigation of Quality of Biomaterials Ibid, pp. 459-468
H.BAKHTIARI, A. NAJAFI ZADEH and M. A. GOLOZAR Effects of heat Treatment on The Wear Resistance of High Chromium Cast Iron Alloys Proceedings of 2nd Steel Symposium, Isfahan University of Technology, Isfahan, IRAN, 18-20 May, 1999, pp. 623-631
A.BEHROOZNIA, A.SAIDI, M. A. GOLOZAR and R.SHATERI Inclusions Produced In Hot Worked Tool Steel, During Various Stages of Steel Making Ibid, pp. 92- 101
F.JAHANBAKHSH, M. A. GOLOZAR, and A. NAJAFI ZADEH Effects of Aluminum on the Wear and Mechanical Properties of Hadfield Steel Ibid, pp. 381-496
A.VAFADAR, M.BAHREVAR POOR, H.NAJJAR AZARI and M. A. GOLOZAR


Microstructural Evaluation of 2024 Aluminum Alloy During Thermo-Mechanical Heat Treatment and Recrystallization Proceedings of The 11th Annual Seminar of Iranian Foundrymen Society, Sharif University of Technology, Tehran, Iran, 3-5 May, 1999, pp. 103-110
K.AZARI, K.ABTAHI, H.NAJJAR AZARI and M. A. GOLOZAR Effects of Thermo-Mechanical Heat Treatment on The Recrystallization Behavior of Semi Continuous Casting 7075 Aluminum Alloy Ibid, pp. 135-144
M.ETESAMI, R.BAGHERI and M. A. GOLOZAR Effects of Various Parameters on the Adhesion of polyethylene Coatings Produced by Fluidized Bed Technique Forth National Iranian Chemical Engineering Congress, Sharif University of Technology, Tehran, Iran, March, 1999, pp. 2/187-2/191.
M. A. GOLOZAR Quality of Diamond Coatings Produced by Oxyacetylene Flame Proceedings of the Second Congress of Iranian Metallurgical Engineering Society, Sharif University of Technology, Tehran, Iran, 19-21 October, 1998, pp. 459-467
A. A. MOAIED, M. MERATIAN, and M. A. GOLOZAR Microstructural Aspects of Steel Rolls and Sleeves Used in Rolling Mills Proceedings of 10th Annual Seminar of Iranian Foundrymen Society, Isfahan University of Technology, Isfahan, Iran, 18-20 May, 1998, pp 381-388
F.JAHANBAKHSH, A.NAJAFIZADEH, and M. A. GOLOZAR Microstructure, Hardness, and Impact Strength of Hadfield Steel Containing Aluminum Ibid, pp 403-414
K.MAHTABI FAM, H.NAJJAR AZARI, and M. A. GOLOZAR Casting Defects in Direct Chilled High Strength 7075 Al-Alloy Ibid, pp 389-394
M.GHOMY, M. A. GOLOZAR, and A. NAJAFIZADEH,
The Effect of Heat Treatment on The Impact Properties of M2 High Speed Tool Steel Proceedings of the First Congress of Metallurgical Engineering Society of Iran, University of Science and Technology, Tehran, Iran, 20-22 October, 1997, pp 263-270.
A. A. MOAIED, M.MERATIAN, and M. A. GOLOZAR Optimizing the Heat Treatment to Produce Uniform Microstructure in Hot Rolling


Steel Rolls Ibid, pp 413-420
R. BAGHERY, M. A. GOLOZAR, M. KHOLGHY Resistant Coating of Polyethylene on Mild Carbon Steel by Spray Electrostatic Technique Proceedings of the Second Iranian Seminar on Surface Engineering, Faculty of Engineering, University of Tehran, Tehran, Iran, 28-30 April, 1997, pp 361-368
M.KHOLGHY, M. A. GOLOZAR, and R. BAGHERY Protection of Plain Carbon Steel in Wet Environments, Using High Density Polyethylene Proceedings of the 5th National Corrosion congress, Sharif University of Technology, Tehran Iran, September, 2-4, 1997, pp. 145-155
M.H. FATHI, V. MORTAZAVI, and M. A. GOLOZAR Evaluation of Mercury Release from Dental Amalgam Ibid, pp. 399-411
A. SAATCHI, M. A. GOLOZAR, and M, A NILFOROUSH HAMADANI Oxidation Behaviour of Chromized, Chrome-Aluminized Low Carbon Steel Ibid, pp. 295-308
H. BAKHTIARY, A. NAJAFI-ZADEH, and M. A. GOLOZAR Effect of Vanadium on Wear and Mechanical Properties of High Chromium Cast Iron Alloys Proceedings of the 9th Annual Seminar of Iranian Foundrymen Society, Iran University of Science and Industry, Tehran, IRAN, June 16-18, 1997, pp. 93-103
R. BAGHERY, M. A. GOLOZAR, and M. KHOLGHY Resistant Coating of Polyethylene on Mild Steel by Spray Electrostatic Technique Proceedings of The 2nd National Seminar of Surface Engineering, Faculty of Engineering, Tehran University, Tehran, Iran, April 28-30, 1997, pp. 361-368
M.KHOLGHY, M. A. GOLOZAR, and R. BAGHERY Surface Conditions of Steel and Quality of Polyethylene Coating on It Proceedings of The Second Chemical Engineering Congress, Amirkabir University of Technology, Tehran, Iran, February 25-27, 1997, pp. 568-572
M. H. FATHI, V. MORTAZAVI, M. A. GOLOZAR, and K. KHOSRAVI Evaluation of Properties and Characteristics of Dental Amalgam Using Vitro and Clinical Tests Ibid, pp. 695-699


M. H. FATHI, V. MORTAZAVI, K. KHOSRAVI, and M. A. GOLOZAR The Effect of Biological Corrosion of Dental Amalgam on Human Body Proceedings of The 7th Annual Conference of Biomedical Engineering, 1996, PP. 355-368
S. H. FIROOZI-ZAHRA, M. A. GOLOZAR Improving Mechanical Properties of Steel Milling Balls Through Heat Treatment, Proceedings "Steel Symposium", IUT, Isfahan Iran, September 25-27, 1996
A. SAATCHI, M. A. GOLOZAR, A. R. RAZI, and M.MIR Role of Inclusions on the API Steel Resistance Against Hydrogen Damage in Sure Environments, Ibid, pp. 800-811
A. VARMAZIAR, M. BAKHSHI, and M. A. GOLOZAR Atlas of Casting Defects Ibid, pp. 785-789
M.A. NILFOROOSH HAMADANI, A. SAATCHI, and M. A. GOLOZAR Oxidation Behaviour of Packed Aluminized Steel Ibid, pp. 581- 595
M. A. SOLTANI, M. A. GOLOZAR, and A. SAATCHI Role of Thermochemical Treatments on the Fatigue Behaviour of Low Alloy Steel, Ibid, pp. 369-375
F. JAHANBAKHSH, M. A. GOLOZAR, and A. NAJAFI-ZADEH Optimization of Wear and Mechanical Properties of Haddfield Steel for Industrial Applications Ibid, pp. 358-368
M. A. SOLTANI, M. A. GOLOZAR, and A. SAATCHI Role of Heat Treatment on Improving The Fatigue Resistance of Plain Carbon Steel Proceedings of The Forth Annual Mechanical Engineering Conference of ISME and Second International Mechanical Engineering Conference, School of Engineering, Shiraz University, Shiraz, Iran, May 13-16, 1996 pp. 593-600
M. A. GOLOZAR The Effect of Substrate and Substrate Surface Conditions on The Quality of Diamond Coatings Proceedings of The Second Congress of Iranian Ceramic Society, University of Science and Technology, Tehran, Iran, 1995


A. REZVANI, A. SAATCHI, J. KHERADMAND, A. SHEIKHBAHAI, S.A. PISHNAMAZI, and M. A. GOLOZAR The Effect of Omitting The Cooling Towers of Blast Furnace Gas Cleaning System in Isfahan Steel Mill Proceedings of The Forth National Corrosion Congress, Isfahan University of Technology, Isfahan, Iran, May 7-9, 1995, pp. 712-729
M.H. FATHI, M. A. GOLOZAR, V. MORTAZAVI, and K. KHOSRAVI Corrosion Behaviour of Dental Amalgams in Vitro Tests Ibid, pp. 1-15
K. ZANGENEH MADAR, M. A. GOLOZAR, and A. NAJAFIZADEH Anodic Dissolution of High Aluminum Cast Iron Alloys in Corrosive Environments Ibid, pp. 39-52.
M.H. FATHI, M. A. GOLOZAR, and V. MORTAZAVI Tarnish and Corrosion of Dental Amalgams, Mechanisms and Their Effects Proceedings of The Second Annual Iranian Society of Mechanical Engineering (ISME) Conference, Sharif University of Technology, Tehran, Iran, May 2-5,1994, pp. 190-197
M.H. FATHI, V. MORTAZAVI, K. KHOSRAVI, and M. A. GOLOZAR The effect of Biological Corrosion of Dental Amalgams in Human Body Proceedings of The Seventh Conference of Iranian Biomedical Engineering, Tehran, Iran, December, 1994, pp. 355-368.
A.M. SHAHHOSSEINI, M. A. GOLOZAR and M.A. SHAHHOSSEINI Thermo-Mechanical Treatment and it a Effect on The Improvement of Mechanical Properties of Microalloyed Steels Proceedings of The First Production and Manufacturing Engineering Conference, Amir Kabir University of Technology, Tehran, Iran, October 13-14, 1993, pp. 391-405
K. ZANGENEH MADAR, A. NAJAFIZADEH and M. A. GOLOZAR An Investigation on the Mechanical Properties and Oxidation of High Aluminum Ductile Cast Iron Alloys at High Temperatures Ibid, pp. 378-390.
M. A. GOLOZAR and A.M. SHAHHOSSEINI Modern Techniques to Produce High Quality Steels Proceedings of The Fifth Annual Seminar of Iranian Foundrymen Society, Sharif University of Technology, Tehran, Iran, June 14-16, 1993, Paper No. 15


M. A. GOLOZAR Pitting Corrosion of Al-Cu-Mg Matrix Composite Proceedings of The Third National Corrosion Congress, School of Engineering, Tehran University, Tehran, Iran, May 10-12, 1993, pp. 123-129
M.H. FATHI and M. A. GOLOZAR Corrosion of Dental Materials Ibid, pp 15-38
H. MANSOORI, M. A. GOLOZAR and A. SAATCHI Corrosion Fatigue of Structural Steel Weldments in the Artificial Sea Water Ibid, pp. 245-276
M. A. GOLOZAR Metal Matrix Composites and Their Pitting Corrosion Resistance Proceedings of The First Annual Scientific and Industrial Conference of Iranian Mechanical Engineering Society, School of Engineering, Tehran University, Iran, February 13-18, 1993, pp. 214-215
A. ZOHROODI and M. A. GOLOZAR Diamond and Diamond-Like Coatings and Their Effects on the Mechanical Properties of Metals Ibid, pp. 216-217
M. A. GOLOZAR and J. V. WOOD A New Technique to Investigate the Quality and Efficiency of Eye Surgical Needles Proceedings of The Fifth Biomedical Engineering Conference, Iran University of Science and Technology, Tehran, Iran, January 5-7, 1993. pp. 72-380
M. A. GOLOZAR Microstructural Aspects of Diamond and Diamond-Like Coatings The Physics of Materials Seminar, Isfahan Refractory Center, Isfahan, Iran, December 16-18, 1992
M. A. GOLOZAR Modern Diamond and Diamond-Like Coatings The First Seminar of Electroplating Industry, Tehran, Iran, September 29-30,1992
M. A. GOLOZAR and A.R. RIAHI Failure of High Pressure Vessels and The Role of Environmental Parameters Proceedings of The Annual Conference of Boilers and Pressure Vessels, AZARAB Industrial Company, Arak, Iran, September, 1992, pp. 129-140.


M. A. GOLOZAR Embrittlement of Steels During Heat Treatment, Proceedings of The Forth Annual Seminar of Iranian Foundrymen Society, Sharif University of Technology, Tehran, Iran, June, 15-17,1992, Paper No. 23.
H. TAHERI-OLIA, M. A. GOLOZAR and A. NAJAFIZADEH
Effects of Thickness, Chemical Composition and Austempering Time and Temperature on the Hardness and Microstructure of Austemper Ductile Iron Alloys Ibid, Paper No. 19
A.R. KIANI-RASHID, A. NAJAFIZADEH and M. A. GOLOZAR Role of Aluminum on the Microstructure, Mechanical Properties and Corrosion of Ductile Iron Ibid, Paper No. 22
M. SOBHANI, M. A. GOLOZAR, and A. SAATCHI Corrosion and Stress Corrosion Cracking of a Selected Marine Steel in The Persian Gulf Water Proceeding of The First Corrosion Symposium in Iranian Industries, Shiraz University, Shiraz, Iran, May 5-6, 1992, pp. 550-584
M. A. GOLOZAR and S.A. PISHNAMAZI Economical Aspects of Corrosion Ibid, pp.167-198
A. SAATCHI, M. A. GOLOZAR, and A.R. RIAHI Corrosion of Several Industrial Alloys in Persian Gulf, Caspian Sea and Oromieh lake Ibid, pp. 306-339
A.M. SHAHHOSSEINI and M. A. GOLOZAR Development of Forged Ti-Microalloyed Steels Proceedings of Third Annual Seminar of Iranian Foundrymen Society, Iran University of Science and technology, Tehran, Iran, September 1991, Paper No. 8.
A. NAJAFIZADEH and M. A. GOLOZAR Role of Austempering Time and Temperature on The Microstructure and Mechanical Properties of Austempered Ductile Iron Containing Various Percentages of Tin and Copper Proceedings of The Second Annual Seminar of Iranian Foundrymen Society, Iran University of Science and Technology, Tehran, Iran, October 1989, pp. 1-11.


M. A. GOLOZAR Stress Corrosion Cracking of Zircalloy-2 Proceedings of The First Iranian National Corrosion Congress, Faculty of Engineering, University of Tehran, Iran, November 1988, pp.125-140

{content}