- English
- فارسی
National (Farsi) Conference papers
National (Farsi) Conference papers;
(THIS SECTION HAS BEEN UPDATED 2007)
• A. SAATCHI, K. RAEISSI, M.A. GOLOZAR, J. SZPUNAR,
"Texture and Surface Morphology in Zinc Electrodeposits",
Proceedings of Iranian Corrosion/2007: ICA International Congress, 2007.
• M. Askari, K. Raeissi, M. A. GOLOZAR
Investigation of pitting corrosion of carbon steel in rich digycolamine units
Book of abstracts of The 1st International Corrosion Congress and 10th National Iranian Corrosion Congress (ICIC2007), 14-17 May, 2007.
Tehran Iran
• Sh. Hasani, K. Raeissi, M. A. GOLOZAR
Saccharin effect on Ni/Co nanocrystalline electrodepositedcoatings
Book of abstracts of The 1st International Corrosion Congress and 10th National Iranian Corrosion Congress (ICIC2007), 14-17 May, 2007.
Tehran Iran
• A. Ashrafi, M. A. GOLOZAR , S. Mallakpour,
Corrosion Investigation of Polypyrrole-Coated Mild Steel Using Electrochemical Impedance Spectroscopy,
Book of abstracts of The 1st International Corrosion Congress and 10th National Iranian Corrosion Congress (ICIC2007), 14-17 May, 2007.
Tehran Iran
• M. ASKARI, K. RAEISSI, M.A. GOLOZAR, H. SHAHBAN,
Electrochemical Behavior of Hydrogen Sulfide,
Proceedings of Iranian Corrosion/2007: ICA International Congress, 2007.
• S. Hasani, K. Raeissi, M.A. GOLOZAR,
Corrosion behavior of electrodeposited nanocrystalline Ni/Co coating in 3.5wt% NaCl solution
CD's and Book of abstracts of the 11th Annual Conference of the Iranian Metallurgical Engineering Society and 19th Annual Conference of the Iranian Foundryman Society, 23-25 Oct., 2007,
Isfahan Steel Mill, Isfahan, Iran
• A. Fattaholhoseini, M.A. GOLOZAR, A. Saatchi, K. Raeissi,
Investigation of passive layer on 316L stainless steel using EIS,
CD's and Book of abstracts of the 11th Annual Conference of the Iranian Metallurgical Engineering Society and 19th Annual Conference of the Iranian Foundryman Society, 23-25 Oct., 2007,
Isfahan Steel Mill, Isfahan, Iran
• A. Fattaholhoseini, A. Saatchi, M.A. GOLOZAR, K. Raeissi,
Effect of surface roughness on corrosion resistance of passive layer
CD's and Book of abstracts of the 11th Annual Conference of the Iranian Metallurgical Engineering Society and 19th Annual Conference of the Iranian Foundryman Society, 23-25 Oct., 2007,
Isfahan Steel Mill, Isfahan, Iran
• A. Mostaed, K. Raeissi, S. Hasani, M.A. GOLOZAR,
Corrosion of steel in armed concrete in 3.5%NaCl aqueous solution
CD's and Book of abstracts of the 11th Annual Conference of the Iranian Metallurgical Engineering Society and 19th Annual Conference of the Iranian Foundryman Society, 23-25 Oct., 2007,
Isfahan Steel Mill, Isfahan, Iran
• Z. Nikseresht, M.A. GOLOZAR, F. Karimzadeh
Localized corrosion in weld metal of 6061 aluminum alloy
CD's and Book of abstracts of the 11th Annual Conference of the Iranian Metallurgical Engineering Society and 19th Annual Conference of the Iranian Foundryman Society, 23-25 Oct., 2007,
Isfahan Steel Mill, Isfahan, Iran
• S. Vahhabzadeh, F. Ashrafizadeh, M.A. GOLOZAR, A. Ghasemi
Microwave and microstructure properties of Zr0.8Sn0.2TiO4 modified by CuO
CD's and Book of abstracts of the 11th Annual Conference of the Iranian Metallurgical Engineering Society and 19th Annual Conference of the Iranian Foundryman Society, 23-25 Oct., 2007,
Isfahan Steel Mill, Isfahan, Iran
• A. Akhbarizadeh, A. Shafyei, M.A. GOLOZAR, M. Kholghi
Effect of retained austenite stabilizing in subzero quenching on mechanical and wear properties of 1.2436 steel
CD's and Book of abstracts of the 11th Annual Conference of the Iranian Metallurgical Engineering Society and 19th Annual Conference of the Iranian Foundryman Society, 23-25 Oct., 2007,
Isfahan Steel Mill, Isfahan, Iran
• S. Hasani, K. Raeissi, M.A. GOLOZAR,
Investigation of texture and morphology of nanocrystalline Ni/Co electrodeposits,
Proceeding of The 2nd student congress of Nanotechnology, 5-7 Sep.2007,
Kashan University, kashan, Iran.
• M. Feizmandian, M.A. GOLOZAR, F. Karimzadeh,
Effect of electrodeposition current on wear behavior of nanocrystalline nickel coatings,
Book of abstract of The 8th National Seminar on Surface Engineering and Heat Treatment, 8-9 May 2007, Shahid Bahonar University of Kerman, Kerman, Iran.
• O. Mohajer, K. Raeissi, A. Saatchi, M.A. GOLOZAR,
Investigation of electrodeposited nanocrystalline nickel coatings using EIS,
Book of abstract of The 8th National Seminar on Surface Engineering and Heat Treatment, 8-9 May 2007, Shahid Bahonar University of Kerman, Kerman, Iran.
• S. Hasani, K. Raeissi, M.A. GOLOZAR,
Effect of saccharin and current density on electrical deposition of nanocrystalline Ni/Co on mild steel, Proceeding of steel symposium 85, 27-28 Feb, 2007, pp.663-670, Amirkabir University of Technology, Tehran,
.
• N. Attarzadeh, A. Ashrafi, K. Raeissi, M.A. GOLOZAR, S. Mallakpour,
Investigation of saccharin addition on improving corrosion resistance of mild steel coated with electropolymerized pyrrole,
Proceeding of steel symposium 85, 27-28 Feb, 2007, pp.743-752,
Amirkabir University of Technology, Tehran,
• H. Asgari, M. Toroghi-Nezhad, M.A. GOLOZAR, S. Abbasi,
Effect of production parameters on texture, corrosion behaviour and thickness of alloy layers thickness of hot dip galvanized coating,
Proceeding of steel symposium 85, 27-28 Feb, 2007, pp.753-762,
Amirkabir University of Technology, Tehran,
• M. Askari, M.A. GOLOZAR, K. Raeissi,
Corrosion of A516 Gr60 steel in Rich DGA solution riched by hydrogen sulfide gas, Proceeding of steel symposium 85, 27-28 Feb, 2007, pp.811-821,
Amirkabir University of Technology, Tehran,
• M. Feizmandian, M.A. GOLOZAR, F. Karimzadeh, K. Raeissi,
Mechanism of texture formation in nanocrystalline nickel electroforming, Proceeding of the first Conference on Nanotechnology, South Region of Iran, Feb.2007,
Shiraz University, Iran
• S. Tahamtan, M.A. GOLOZAR, F. Karimzadeh, B. Niromand,
Mechanical Properties of semisolid alloy A356 formed using thixoforming method,
Book of abstracts of 10th Annual Congress of Iranian Metallurgical Engineers Society, 14-15 Nov, 2006, p.156,
Ferdowsi University of Mashhad, Mashhad, Iran.
• H. ASGARI, F. ASHRAFIZADEH, M. TOROGHINEJAD, M.A. GOLOZAR,
K. RAEISSI,
Effect of texture on corrosion resistance of hot-dip galvanized coatings,
Proceedings of 13th International Metallurgy & Materials Congress, PP. 494-501, 2006
• A. Fadavi Bostani, F. Karimzadeh, B. Niromand, M.A. GOLOZAR,
Mechanical Properties of thixoformed alloy A356 produced using SIMA method,
Book of abstracts of 10th Annual Congress of Iranian Metallurgical Engineers
Society, 14-15 Nov, 2006, p.156, Ferdowsi University of Mashhad, Mashhad, Iran.
• M. Feizmandian, M.A. GOLOZAR, F. Karimzadeh,
Effect of applied current density on morphology and texture of electroformed nickel,
Book of abstracts of 10th Annual Congress of Iranian Metallurgical Engineers Society, 14-15 Nov, 2006, p.156, Ferdowsi University of Mashhad, Mashhad, Iran.
• M. Askari, K. Raeissi, M.A. GOLOZAR,
Investigation of mild steel corrosion in DEA and DGA solutions in sour gas sweetening process,
Book of abstracts of 10th Annual Congress of Iranian Metallurgical Engineers Society, 14-15 Nov, 2006, p.156, Ferdowsi University of Mashhad, Mashhad, Iran.
• Z. Nikseresht, F. Karimzadeh, M.A. GOLOZAR, A. Tahvilian,
Corrosion behavior of 6061 aluminum alloy weld metal in sodium chloride solution,
Book of abstracts of 10th Annual Congress of Iranian Metallurgical Engineers Society, 14-15 Nov, 2006, p.156, Ferdowsi University of Mashhad, Mashhad, Iran.
• H. Asgari, M. Toroghi-Nezhad, M.A. GOLOZAR, S. M. Navabi, S. Abbasi,
Effect of production parameters on texture, corrosion behavior and alloy layers thickness of hot dip galvanized coating,
Book of abstracts of 10th Annual Congress of Iranian Metallurgical Engineers Society, 14-15 Nov, 2006, p.156, Ferdowsi University of Mashhad, Mashhad, Iran.
• H. ESKANDARY, H. EDRIS, and M.A. GOLOZAR
Tribological Behavior of Heat Treated High Chromium White Cast Iron
Containing Niobium, Proceedings of steel Symposium 84, 28 Feb-1March, 2006,
pp. 681-693. Isfahan University of Technology, Isfahan, Iran.
• H. Khabbazi, R. Bagheri, M. A. Golozar,
Adhesion and corrosion resistance of Co(propylene-ethylene) powder coated steel using electrostatic spray system,
Proceeding of the 10th National Congress of Chemical Engineers of Iran,pp.4960-4970, 2005
University of Sistan & Baluchestan, Iran
• H. ESKANDARI, H.EDRIS and M.A. GOLOZAR,
The Effects of Niobium and Heat Treatment on the Wear and Mechanical Properties of High Chromium White Cast Iron,
Proceedings of the 9th Congress of the Iranian Metallurgical Society, 15-16 November 2005, pp.453-462, Shiraz University, Iran
• J. SALEHI, H. DEHAGHIN, F. ASHRAFIZADEH, and M.A. GOLOZAR
The Effect of Plasma on the Lubrication Mechanism of PVD Lead Coatings
Ibid pp. 824-832.
• O. MIRZAEE, M.A. GOLOZAR, and A. SHAFYEI
The Role of Interface Energies in the Final Sintering of Ni-Zn Soft Ferrites,
Ibid pp. 1773-1784
• J. SALEHI, H. DEHAGHIN, F. ASHRAFIZADEH, and M.A. GOLOZAR
Role of Plasma and its Intensity on the Lubrication of CVD Pb Coatings,
CD of 6th National Surface Engineering & Heat Treatment Congress, Isfahan University of Technology, Isfahan, Iran, 9-10 May, 2005
• H.ESKANDARY, H. EDRIS, M. FOULADGAR, and M.A. GOLOZAR
Investigation of Three Body Abrasive Wear of Heat Treated High Chromium White Cast Iron Containing Niobium,
Ibid.
• H. KHABBAZI, R. BAGHERI, and M.A. GOLOZAR
Ductility and Adhesion of Modified Co-polymer Propylene-Ethilen Powder Coating Produced on Steel Substrates Using Electrostatic Spraying
Ibid.
• A.ASHRAFI, M.A. GOLOZAR, and S. MALLAKPOUR
Using Polypyrrole as Corrosion Resistance Coating for 7075 Aluminum Alloy Substrates
Ibid.
• A.ASHRAFI, M.A. GOLOZAR, and S.MALLAKPOUR
Coating of Aluminum Alloy 7075 with Polypyrrole as a Conductive Polymer Using Cyclic Voltammetry
Proceedings of the 9th National Corrosion Congress, Isfahan, Iran, 2-3 May 2005, pp. 134-141
• M. MOSTAJERAN and M.A. GOLOZAR
Investigation of Stress Corrosion Cracking Mechanism of as Cast 7075 Al Alloy Using Slow Strain Rate Tension Test
Ibid. pp. 258-269
• A.ASHRAFI, M.A. GOLOZAR, and S. MALLAKPOUR
Nucleation and Growth of polypyrrole Coating on Pretreated Al Alloy 7075
CD of Abstracts, 11th Seminar of Organic Chemistry, Isfahan University of Technology, Isfahan, Iran, 1-3 February 2005
• K.KARIM DEHNAVI, M.A.GOLOZAR, and H.N.AZARI
Effect of Heat Treatment and Thermomechanical Treatment on the SCC of High Strength 7075 Aluminum Alloy
Proceedings of Iranian Aluminum Congress, Iran University of Science and Technology, Tehran, Iran, 6-7 December 2004, pp. 631-642
• R. RAIESSI, A. SAATCHI, M. A. GOLOZAR, J.A.SZPUNAR
Role of Epitaxial Growth on the Texture Development of Zinc Electrodeposited Coatings
Proceedings of the 8th Annual Congress of Metallurgical Society of Iran, Isfahan University of Technology, Isfahan, Iran, 12-13 October 2004, pp.21-30
• H.ESKANDARI, H.EDRIS, M.A.GOLOZARA.SHAFIEY
Effect of Niobium on the Mechanical Propertied of High Chromium White Cast Iron
Ibid, pp. 1323-1330
• A.GHASEMI, F.ASHRAFIZADEH, M.A.GOLOZAR,and B.A.MOGHADAM
Development of Sol-Gel Process to Produce Silica Film by Spin Method
Proceedings of 7th Congress of Metallurgical Engineering Society of Iran, Sharif University of Technology, Tehran, Iran, 12-14 October 2003, pp. 139-147
• K. RAEISSI, A.SAATCHI, and M.A.GOLOZAR,
Effect of Cathodic Polarization on the Morphology and Texture of Electrodeposited Zinc Coatings
Proceedings of the 5th National Surface Engineering and Heat Treatment Congress, Amir Kabir University of Technology, 13-14 May, 2003, Tehran, Iran, pp. 62-70
• R. MOZAFFARINIA, F,ASHRAFIZADEH, M.A.GOLOZAR, A.GHASEMI
Evaluation of Optical Properties of Multy-layer Coatings of SiO2/SiO2-ZnO Produced by Sol-Gel Method
Ibid, pp. 414-424
• A.GHASEMI, F,ASHRAFIZADEH, M.A.GOLOZAR, and R.MOZAFFATINIA
Effect of Catalyst on the Formation of Silica Coating on Nickel Substrate, Using Sol-Gel Technique
Ibid, pp. 425-434
• M.GHASEMI, F.ASHRAFIZADEH,and M. A. GOLOZAR
Optimization of Effective Parameters on the Alumina-Silica Coatings Produced by Sol-Gel Method
Proceedings of the 6th Annual Congress of Metallurgical Society of Iran, Iran University of Science and Technology, pp. October 2002.
• A. ASHRAFI, M. A. GOLOZAR, and SH. MALAKPOOR
Corrosion Characteristics of Steel Substrates Coated by Polypyrrole Using Electropolymerization from T4Sna Aqueous Solution
Proceedings of the Annual Chemical Engineering Conference, Tehran University, Iran, November 2002.
• K.KARIMDEHNAVI, M. A. GOLOZAR and H.NAJAR-AZARI
Effects of Heat Treatment and Thermo-Mechanical Treatment on the Mechanical Properties of 7075 Aluminum Alloys
“MATFORM’81” 1st Conference of Metal Forming, Department of Engineering and Materials Science, Sharif University of Technology, Tehran, Iran, 8-10 May 2002, pp 363-369
• M.A.GOLOZAR, M.MERATIAN, and S. NOSOUHIAN
Effect of Solidification Conditions on the Microstructure of Cast Aluminum Alloys Produced by Directional solidification, Proceedings of the 13th Annual Seminar of Iranian Foundrymen’s Society, Iran University of Science and Technology, Tehran, Iran, 17-19 June 2001, pp. 153-162
• M. FAZEL NAJAFABADI, M. A. GOLOZAR
Evaluation of Stress Corrosion Cracking of Al-TiB2 Composite, Using Slow Strain Rate Tests
Proceedings of the 5th Annual Congress Metallurgical Society of Iran, Amir Kabir University of Technology, IRAN, 6-7 November 2001, pp. 479-486
• M.MOSTAJERAN, M. A. GOLOZAR
Evaluation of Diffusible Hydrogen in 7075 Aluminum Alloy, Using Glycerin Displacement Method Ibid, pp. 501-510
• F.ALAVI NAINI, M. A. GOLOZAR, and K.RAEISSI
Pitting Corrosion of Pure Aluminum and Al-TiB2 Composite in 1M NaCl Solution
Ibid, pp. 487-499
• A.BEHROOZNIA, A.SAIDI, and M. A. GOLOZAR
Nonmetallic Inclusions Produced during Manufacturing Process of Hot-work Tool Steel
Proceedings of the 3rd Steel Symposium, Ahwaz, Iran, 21-22 February 2001, pp. 55-64
• E.ROOHANI, A.SAATCHI, and M. A. GOLOZAR
Hydrogen Embrittlement of API Steel in Environments Containing H2S, Using an Artificial Solution
Ibid, pp. 699-710
• M.FAZELNAJAFABADI and M. A. GOLOZAR
Production of Al-ZrB2 Composite Using Reactive Slug
Proceedings of the 4th Annual Congress of Metallurgical Society of Iran, Faculty of Engineering, University of Tehran, Tehran, Iran, Oct. 16-18, 2000, pp. 495-502
• SH. SAMANIAN, M.KARAMINEJAD, and M. A. GOLOZAR
Premature Failure of Preheating Water Tubes in High Pressure Boilers
Ibid, pp. 743-752
• M.MOSTAJERAN, M. A. GOLOZAR, M.MONAZAH, and H.N.AZARI
An Investigation on the Effect of Heat Treatment on Localized Corrosion of 7075 Aluminum Alloy
Ibid, pp. 679-689
• M.MONAZZAH, H. N. AZARI and M. A. GOLOZAR
Effect of homogenizing Treatment on the Age Hardening Behaviour of 7075 D.C. Cast Aluminum Alloy
Proceedings of the 2nd Metallurgical Congress of Non Ferrous Alloys, University of Shahid Bahonar, Kerman, Iran, May, 9-11, 2000, pp. 723-730
• R.AGHATAGHI, M. A. GOLOZAR, and A. SATCHI
Optimizing the bath Conditions for Electroplating of Zn-Ni Coatings Using Interrupted Current
Ibid, pp. 1101-1110.
• SH.SHOJAEIEH, M.KARAMINEJAD, and M. A. GOLOZAR
An investigation on the Properties of Electroplated Zn-Ni Coatings Produced by Interrupted Current
Ibid, pp. 1007-1014
• M.FAZELNAJAFABADI and M. A. GOLOZAR
Corrosion Behaviour of Al-TiB2 Composite
Ibid, pp. 803-811
• M. FAZEL NAJAFABADI and M. A. GOLOZAR
Production of Al-TiB2 Composite Using Reactive Slug
Proceedings of the 11th Annual Seminar of Iranian Foundrymen Society, Faculty of Engineering, Tehran University, Tehran, Iran, June 12-15, 2000, pp. 211-219.
• S. H. SHOJAEIEH, M. KARAMINEJAD, and M. A. GOLOZAR
Optimizing the Electroplating Bath Conditions for Zn-Ni Coatings
Proceedings of the 3rd Annual Seminar of Surface Engineering, Tehran, Iran, Nov. 7-9, 1999, pp. 153-162
• M. H. FATHI, M. A. GOLOZAR, and M. KHOLGHI
Economical and Metallurgical Comparison of Corrosion Resistance Coatings for Automotive Industry
Ibid, pp. 209-216
• E. ROOHANI, M. A. GOLOZAR, A. SATCHI, and S. M. MONIRVAGHEFI
Using an Artificial Condition to Study the Corrosion Resistance of API Steel in a Sour Environment
Proceedings of the 3rd Annual Congress of Metallurgical Society of Iran, 2nd Vol. Isfahan university of Technology, Isfahan, Iran, October 18-20, 1999, pp. 363-372
• A. BEHROOZNIA, A. SAIDI, and M. A. GOLOZAR
ESR Process and Effect of Refining on the Inclusions of Hot Work Tool Steels
Ibid, 1st Vol. pp. 99-108
• M.ETESAMI, R.BAGHERI, and M. A. GOLOZAR
Production of Polyethylene powder Coating Having Good Mechanical and Chemical Properties on Plain Carbon Steel
Ibid, pp. 497-505
• M.H. FATHI, V. MORTAZAVI, and M. A. GOLOZAR
Role of Metallurgical Methods on the Investigation of Quality of Biomaterials
Ibid, pp. 459-468
• H.BAKHTIARI, A. NAJAFI ZADEH and M. A. GOLOZAR
Effects of heat Treatment on The Wear Resistance of High Chromium Cast Iron Alloys
Proceedings of 2nd Steel Symposium, Isfahan University of Technology, Isfahan, IRAN, 18-20 May, 1999, pp. 623-631
• A.BEHROOZNIA, A.SAIDI, M. A. GOLOZAR and R.SHATERI
Inclusions Produced In Hot Worked Tool Steel, During Various Stages of Steel Making
Ibid, pp. 92- 101
• F.JAHANBAKHSH, M. A. GOLOZAR, and A. NAJAFI ZADEH
Effects of Aluminum on the Wear and Mechanical Properties of Hadfield Steel
Ibid, pp. 381-496.
• A.VAFADAR, M.BAHREVAR POOR, H.NAJJAR AZARI and M. A. GOLOZAR
Microstructural Evaluation of 2024 Aluminum Alloy During Thermo-Mechanical Heat Treatment and Recrystallization
Proceedings of The 11th Annual Seminar of Iranian Foundrymen Society, Sharif University of Technology, Tehran, Iran, 3-5 May, 1999, pp. 103-110
• K.AZARI, K.ABTAHI, H.NAJJAR AZARI and M. A. GOLOZAR
Effects of Thermo-Mechanical Heat Treatment on The Recrystallization Behavior of Semi Continuous Casting 7075 Aluminum Alloy
Ibid, pp. 135-144
• M.ETESAMI, R.BAGHERI and M. A. GOLOZAR
Effects of Various Parameters on the Adhesion of polyethylene Coatings Produced by Fluidized Bed Technique
Forth National Iranian Chemical Engineering Congress, Sharif University of Technology, Tehran, Iran, March, 1999, pp. 2/187-2/191.
• M. A. GOLOZAR
Quality of Diamond Coatings Produced by Oxyacetylene Flame
Proceedings of the Second Congress of Iranian Metallurgical Engineering Society, Sharif University of Technology, Tehran, Iran, 19-21 October, 1998, pp. 459-467
• A. A. MOAIED, M. MERATIAN, and M. A. GOLOZAR
Microstructural Aspects of Steel Rolls and Sleeves Used in Rolling Mills
Proceedings of 10th Annual Seminar of Iranian Foundrymen Society, Isfahan University of Technology, Isfahan, Iran, 18-20 May, 1998, pp 381-388
• F.JAHANBAKHSH, A.NAJAFIZADEH, and M. A. GOLOZAR
Microstructure, Hardness, and Impact Strength of Hadfield Steel Containing Aluminum
Ibid, pp 403-414
• K.MAHTABI FAM, H.NAJJAR AZARI, and M. A. GOLOZAR
Casting Defects in Direct Chilled High Strength 7075 Al-Alloy
Ibid, pp 389-394
• M.GHOMY, M. A. GOLOZAR, and A. NAJAFIZADEH,
The Effect of Heat Treatment on The Impact Properties of M2 High Speed Tool Steel
Proceedings of the First Congress of Metallurgical Engineering Society of Iran, University of Science and Technology, Tehran, Iran, 20-22 October, 1997, pp 263-270.
• A. A. MOAIED, M.MERATIAN, and M. A. GOLOZAR
Optimizing the Heat Treatment to Produce Uniform Microstructure in Hot Rolling Steel Rolls
Ibid, pp 413-420
• R. BAGHERY, M. A. GOLOZAR, M. KHOLGHY
Resistant Coating of Polyethylene on Mild Carbon Steel by Spray Electrostatic Technique
Proceedings of the Second Iranian Seminar on Surface Engineering, Faculty of Engineering, University of Tehran, Tehran, Iran, 28-30 April, 1997, pp 361-368
• M.KHOLGHY, M. A. GOLOZAR, and R. BAGHERY
Protection of Plain Carbon Steel in Wet Environments, Using High Density Polyethylene
Proceedings of the 5th National Corrosion congress, Sharif University of Technology, Tehran Iran, September, 2-4, 1997, pp. 145-155
• M.H. FATHI, V. MORTAZAVI, and M. A. GOLOZAR
Evaluation of Mercury Release from Dental Amalgam
Ibid, pp. 399-411
• A. SAATCHI, M. A. GOLOZAR, and M, A NILFOROUSH HAMADANI
Oxidation Behaviour of Chromized, Chrome-Aluminized Low Carbon Steel
Ibid, pp. 295-308
• H. BAKHTIARY, A. NAJAFI-ZADEH, and M. A. GOLOZAR
Effect of Vanadium on Wear and Mechanical Properties of High Chromium Cast Iron Alloys
Proceedings of the 9th Annual Seminar of Iranian Foundrymen Society, Iran University of Science and Industry, Tehran, IRAN, June 16-18, 1997, pp. 93-103
• R. BAGHERY, M. A. GOLOZAR, and M. KHOLGHY
Resistant Coating of Polyethylene on Mild Steel by Spray Electrostatic Technique
Proceedings of The 2nd National Seminar of Surface Engineering, Faculty of Engineering, Tehran University, Tehran, Iran, April 28-30, 1997, pp. 361-368
• M.KHOLGHY, M. A. GOLOZAR, and R. BAGHERY
Surface Conditions of Steel and Quality of Polyethylene Coating on It
Proceedings of The Second Chemical Engineering Congress, Amirkabir University of Technology, Tehran, Iran, February 25-27, 1997, pp. 568-572
• M. H. FATHI, V. MORTAZAVI, M. A. GOLOZAR, and K. KHOSRAVI
Evaluation of Properties and Characteristics of Dental Amalgam Using Vitro and Clinical Tests
Ibid, pp. 695-699
• M. H. FATHI, V. MORTAZAVI, K. KHOSRAVI, and M. A. GOLOZAR
The Effect of Biological Corrosion of Dental Amalgam on Human Body
Proceedings of The 7th Annual Conference of Biomedical Engineering, 1996, PP. 355-368
• S. H. FIROOZI-ZAHRA, M. A. GOLOZAR
Improving Mechanical Properties of Steel Milling Balls Through Heat Treatment, Proceedings "Steel Symposium", IUT, Isfahan Iran, September 25-27, 1996
• A. SAATCHI, M. A. GOLOZAR, A. R. RAZI, and M.MIR
Role of Inclusions on the API Steel Resistance Against Hydrogen Damage in Sure Environments, Ibid, pp. 800-811
• A. VARMAZIAR, M. BAKHSHI, and M. A. GOLOZAR
Atlas of Casting Defects
Ibid, pp. 785-789
• M.A. NILFOROOSH HAMADANI, A. SAATCHI, and M. A. GOLOZAR
Oxidation Behaviour of Packed Aluminized Steel
Ibid, pp. 581- 595
• M. A. SOLTANI, M. A. GOLOZAR, and A. SAATCHI
Role of Thermochemical Treatments on the Fatigue Behaviour of Low Alloy Steel, Ibid, pp. 369-375
• F. JAHANBAKHSH, M. A. GOLOZAR, and A. NAJAFI-ZADEH
Optimization of Wear and Mechanical Properties of Haddfield Steel for Industrial Applications
Ibid, pp. 358-368
• M. A. SOLTANI, M. A. GOLOZAR, and A. SAATCHI
Role of Heat Treatment on Improving The Fatigue Resistance of Plain Carbon Steel
Proceedings of The Forth Annual Mechanical Engineering Conference of ISME and Second International Mechanical Engineering Conference, School of Engineering, Shiraz University, Shiraz, Iran, May 13-16, 1996 pp. 593-600
• M. A. GOLOZAR
The Effect of Substrate and Substrate Surface Conditions on The Quality of Diamond Coatings
Proceedings of The Second Congress of Iranian Ceramic Society, University of Science and Technology, Tehran, Iran, 1995
• A. REZVANI, A. SAATCHI, J. KHERADMAND, A. SHEIKHBAHAI, S.A. PISHNAMAZI, and M. A. GOLOZAR
The Effect of Omitting The Cooling Towers of Blast Furnace Gas Cleaning System in Isfahan Steel Mill
Proceedings of The Forth National Corrosion Congress, Isfahan University of Technology, Isfahan, Iran, May 7-9, 1995, pp. 712-729
• M.H. FATHI, M. A. GOLOZAR, V. MORTAZAVI, and K. KHOSRAVI
Corrosion Behaviour of Dental Amalgams in Vitro Tests
Ibid, pp. 1-15
• K. ZANGENEH MADAR, M. A. GOLOZAR, and A. NAJAFIZADEH
Anodic Dissolution of High Aluminum Cast Iron Alloys in Corrosive Environments
Ibid, pp. 39-52.
• M.H. FATHI, M. A. GOLOZAR, and V. MORTAZAVI
Tarnish and Corrosion of Dental Amalgams, Mechanisms and Their Effects
Proceedings of The Second Annual Iranian Society of Mechanical Engineering (ISME) Conference, Sharif University of Technology, Tehran, Iran, May 2-5,1994, pp. 190-197
• M.H. FATHI, V. MORTAZAVI, K. KHOSRAVI, and M. A. GOLOZAR
The effect of Biological Corrosion of Dental Amalgams in Human Body
Proceedings of The Seventh Conference of Iranian Biomedical Engineering, Tehran, Iran, December, 1994, pp. 355-368.
• A.M. SHAHHOSSEINI, M. A. GOLOZAR and M.A. SHAHHOSSEINI
Thermo-Mechanical Treatment and it a Effect on The Improvement of Mechanical Properties of Microalloyed Steels
Proceedings of The First Production and Manufacturing Engineering Conference, Amir Kabir University of Technology, Tehran, Iran, October 13-14, 1993, pp. 391-405
• K. ZANGENEH MADAR, A. NAJAFIZADEH and M. A. GOLOZAR
An Investigation on the Mechanical Properties and Oxidation of High Aluminum Ductile Cast Iron Alloys at High Temperatures
Ibid, pp. 378-390.
• M. A. GOLOZAR and A.M. SHAHHOSSEINI
Modern Techniques to Produce High Quality Steels
Proceedings of The Fifth Annual Seminar of Iranian Foundrymen Society, Sharif University of Technology, Tehran, Iran, June 14-16, 1993, Paper No. 15
• M. A. GOLOZAR
Pitting Corrosion of Al-Cu-Mg Matrix Composite
Proceedings of The Third National Corrosion Congress, School of Engineering, Tehran University, Tehran, Iran, May 10-12, 1993, pp. 123-129
• M.H. FATHI and M. A. GOLOZAR
Corrosion of Dental Materials
Ibid, pp 15-38.
• H. MANSOORI, M. A. GOLOZAR and A. SAATCHI
Corrosion Fatigue of Structural Steel Weldments in the Artificial Sea Water
Ibid, pp. 245-276
• M. A. GOLOZAR
Metal Matrix Composites and Their Pitting Corrosion Resistance
Proceedings of The First Annual Scientific and Industrial Conference of Iranian Mechanical Engineering Society, School of Engineering, Tehran University, Iran, February 13-18, 1993, pp. 214-215
• A. ZOHROODI and M. A. GOLOZAR
Diamond and Diamond-Like Coatings and Their Effects on the Mechanical Properties of Metals
Ibid, pp. 216-217
• M. A. GOLOZAR and J. V. WOOD
A New Technique to Investigate the Quality and Efficiency of Eye Surgical Needles.
Proceedings of The Fifth Biomedical Engineering Conference, Iran University of Science and Technology, Tehran, Iran, January 5-7, 1993. pp. 72-380
• M. A. GOLOZAR
Microstructural Aspects of Diamond and Diamond-Like Coatings
The Physics of Materials Seminar, Isfahan Refractory Center, Isfahan, Iran, December 16-18, 1992
• M. A. GOLOZAR
Modern Diamond and Diamond-Like Coatings
The First Seminar of Electroplating Industry, Tehran, Iran, September 29-30, 1992.
• M. A. GOLOZAR and A.R. RIAHI
Failure of High Pressure Vessels and The Role of Environmental Parameters
Proceedings of The Annual Conference of Boilers and Pressure Vessels, AZARAB Industrial Company, Arak, Iran, September, 1992, pp. 129-140.
• M. A. GOLOZAR
Embrittlement of Steels During Heat Treatment, Proceedings of The Forth Annual Seminar of Iranian Foundrymen Society, Sharif University of Technology, Tehran, Iran, June, 15-17,1992, Paper No. 23.
• H. TAHERI-OLIA, M. A. GOLOZAR and A. NAJAFIZADEH
Effects of Thickness, Chemical Composition and Austempering Time and Temperature on the Hardness and Microstructure of Austemper Ductile Iron Alloys Ibid, Paper No. 19
• A.R. KIANI-RASHID, A. NAJAFIZADEH and M. A. GOLOZAR
Role of Aluminum on the Microstructure, Mechanical Properties and Corrosion of Ductile Iron
Ibid, Paper No. 22
• M. SOBHANI, M. A. GOLOZAR, and A. SAATCHI
Corrosion and Stress Corrosion Cracking of a Selected Marine Steel in The Persian Gulf Water
Proceeding of The First Corrosion Symposium in Iranian Industries, Shiraz University, Shiraz, Iran, May 5-6, 1992, pp. 550-584
• M. A. GOLOZAR and S.A. PISHNAMAZI
Economical Aspects of Corrosion
Ibid, pp.167-198
• A. SAATCHI, M. A. GOLOZAR, and A.R. RIAHI
Corrosion of Several Industrial Alloys in Persian Gulf, Caspian Sea and Oromieh lake,
Ibid, pp. 306-339
• A.M. SHAHHOSSEINI and M. A. GOLOZAR
Development of Forged Ti-Microalloyed Steels
Proceedings of Third Annual Seminar of Iranian Foundrymen Society, Iran University of Science and technology, Tehran, Iran, September 1991,
Paper No. 8.
• A. NAJAFIZADEH and M. A. GOLOZAR
Role of Austempering Time and Temperature on The Microstructure and Mechanical Properties of Austempered Ductile Iron Containing Various Percentages of Tin and Copper
Proceedings of The Second Annual Seminar of Iranian Foundrymen Society, Iran University of Science and Technology, Tehran, Iran, October 1989, pp. 1-11.
• M. A. GOLOZAR
Stress Corrosion Cracking of Zircalloy-2
Proceedings of The First Iranian National Corrosion Congress, Faculty of Engineering, University of Tehran, Iran, November 1988, pp.125-140