- English
- فارسی
International Journal Papers
International Journal Papers
(2023)
AFSHARI M. ESLAMI A. GOLOZAR M.A. FATEHI A. GORJI H. R. AHMADI M. KAVIAN A. TAVOSI S. D.
Investigation on utilizing pulse CP in a city gas station: a comparison with conventional CP, Journal of Pipeline Science and Engineering, Available online 14 January 2023, 100109, In Press.
FATEHI A., ESLAMI A.M., GORJI H., GOLOZAR M.A.
Microbial Corrosion of Water Distribution Piping of a Petrochemical Plant
Journal of Failure Analysis and Prevention, Part A, Accepted for Publication
(2021)
•SEFIDKAR DEZFOOLI M. SHAMANIAN M. GOLOZAR M.A
The effect of bonding time on the microstructure and mechanical properties of dissimilar transient liquid phase bonding between UNS N08825 alloy and UNS S32750 super duplex stainless steel using the BNi-2 interlayer, Journal of Manufacturing Processes, April 2021.
(2020)
• PANAHI, H., ESLAMI, A. M., GOLOZAR, M. A., ASHRAFI LALEH A.,
Failure Analysis of a Shell-and-Tube Heat Exchanger in an Amin Gas Treatinh Plants, Accepted by Engineering Failure Analyses. 2020.
•FARHADIAN, M., RAEISSI, K., GOLOZAR, M.A., BARBOUSH, A.,
Applied Surface Science, May 2020.
•FARHADIAN, M., RAEISSI, K., GOLOZAR, M. A.,
Effect of Amorphous Silica Addition on Martensitic Phase Transformation of Zirconia and Investigation of its Tetragonal Structure Stability Mechanisms. Journal of Advanced Materials in Engineering, Volume 39, Issue 2 (Journal of Advanced Materials-Summer 2020
(2019)
• PANAHI, H., ESLAMI, A. M., GOLOZAR, M. A.,
Effect of Heat Stable Acids on Corrosion and Stress Corrosion Cracking
Initiation of 304 and 316 Stainless Steels inactivated Methyl Diethanol Amine
(aMDEA) solution. Corrosion Engineering, Science and Technology, The
International Journal of Corrosion Processes and Corrosion Control. 2019.
• PISHVA, P., GOLOZAR, M. A., KAVIANI, B., JALALI, S., RAHIMI,
M. H., RAIE, A., SOLTANI, E., FARDAFSHARI, M., Peikari, M.,
Premature Failure of Cu-Ni Tubes in Heat Exchangers. Materials
Performance, Vol. 58, No.10, October 2019.
• NOOHI, Z., TOROGHINEJAD, M. R., GOLOZAR, M. A., CAVALIERE, P.,
Evaluation of Aluminum/Alumina/Titanium Composites Produced by Continual
Annealing and Roll Bonding Process. Materials Science and Technology, July
2019.
• FOULADI, S., ASHRAFIZADEH, F., GOLOZAR, M. A., RAZAVI, S,
Influence of Age Hardening on Mechanical Properties of Cast
Nickel- Aluminum Bronze Containing Shrinkage Porosity. Journal of Failure
Analysis and Prevention, vol. 19, No. 5, 2019, pages1498-1508
• FARHADIAN, M., RAEISSI, K., GOLOZAR, M.A., LABBAF, S., HAJILOU, T.,
BARNOUSH, A. "Electrophoretic Deposition and Corrosion Performance of
Zirconia-Silica Composite Coating Applied on Surface Treated 316L Stainless
Steel: Toward Improvement of Interface Structure" Surface and Coatings
Technology, 380, 2019, 125015.
• MAHMOUDI, M., RAEISSI, K., KARIMZADEH, F., GOLOZAR, M.A. "A Study
on Corrosion Behavior of Graphene Oxide Coating Produced on Stainless
Steel by Electrophoretic Deposition" Surface and Coatings Technology, 372,
2019, Pages 327-342.
(2018)
● H. HEYDARI, M. TALEBIAN, Z. SALARVAND, K. RAEISSI, M. A. GOLOZAR,
Comparison of two Schiff Bases Containing O-Methyl and Nitro Substitutes for
Corrosion of Mild Steel in 1 M HCl Solution.
Journal of Molecular Liquids, Volume 254, 15 March 2018, Pages 177-187.
● A.ABDOLLAHI, M.SHAMANIAN, M.A. GOLOZAR,
Comparison of Pulsed and Continuous Current Gas Tungsten Arc Welding in
Dissimilar Welding Between UNS S32750 and AISI 321 in Optimized
Condition,
International Journal of Advanced Manufacturing Technology, 97(1) April
2018.
● H. PANAHI, A.ESLAMI, M.A. GOLOZAR
Stress Corrosion Cracking Initiation of Grade 304 and 316
Stainless Steels in Activated Methyl Diethanol Amine (aMDEA) Solution.
Journal of Natural Gas Science and Engineering 55 April 2018.
● A. HAKIMIZAD, K. RAEISSI, M.A. GOLOZAR, X. LU, C. BLAWERT,
Influence of Cathodic duty cycle on the Properties of Tungsten Containing
Al2O3/TiO2 PEO Nano-Composite Coatings,
Surface and Coating Technology, 30, February 2018.
● S. KHORSAND, A. SHEIKHI, K. RAEISSI, M.A. GOLOZAR,
Hot corrosion behavior of Inconel 625 Superalloy in Eutectic Molten Salt,
Oxidation of Metals, January 2018.
(2017)
● H. PANAHI. A. ESLAMI, M.A. GOLOZAR, A. ASHRAFI, M. MAZAREI
Failure analysis of Type 304 stainless Steel Amine Exchanger Sheets in Gas
Sweeting Plant,
Case Studies in Engineering Failure Analysis 9, October 2017, Pages 87-98.
● A. HAKIMIZAD, K. RAEISSI, M.A. GOLOZAR, X. LUI, M. L. ZHELUDKEVICH
The Effect of Pulse Waveforms on Surface Morphology, Composotion and
Corrosion Behaviour of Al2O3 and Al2O3/TiO2 Nano-Composite Coatings on
7075 Aluninum Alloy,
Surface and Coating Technology, Volume 324, 15 , 2017, Pages 208-221
● A. ABDOLLAHI, M. SHAMANIAN, M.A. GOLOZAR,
Parametric Optimization of Pulsed Current Gas Arc Welding of Dissimilar
Welding Between UN32750 and AISI Based on Taguchi Method,
Transactions of the Indian Institute of Metals 71(3), September 2017.
● M. DADFAR, M. SALEHI, M.A. GOLOZAR, S. TRASATTI
Surface and Corrosion Properties of Modified Passive Layer on 304 Stainless
Steel as Bipolar Plates for PEMFCs,
International Journal of Hydrogen Energy, September 2017.
● A. GOLSHIRAZI, M. KHARAZI, M.A. GOLOZAR
Polyethylenimine/Kappa Carrageenan: Micro-Arc Oxidation Coating for
Passivation of Magnesium Alloy,
Carbohydrate Polymers 167, March 2017
(2016)
● M.H. TAHMASEBI, M.VICENZOR, M. HASHEMPOUR and M. BESTETTI,
M.A. GOLOZAR, K. RAESSI,
Nanosized Mn-Ni Oxide Thin films via Anodic electrodeposition: A Study of the
Electrodepositions Between Morphology, Structure and Capacitive Behavior.
Electrochimica Acta, 206, (2016), 143-154.
● M. DADFAR, M. SALEHI. M.A. GOLOZAR, S. TRASATTI
Surface Modification of 304 Stainless Steels to Improve Corrosion Behaviour
And Interfacial Contact Resistance of Bipolar Plates,
International Journal of Hydrogen Energy¸2016, 09, 149
● M.H. TAHMASEBI, K. RAESSI, M.A. GOLOZAR, M.VICENZOR,
M. HASHEMPOUR and M. BESTETTI,
Tailoring the Pseudocapacitive Behaviour of Electrochemically Deposited
Manganese-Nickel Oxide Films,
Electrochemica Acta, 190, (2016) 636-647.
● M.R. KARIMI, H.R. SALIMI JAZI, M.A. GOLOZAR,
Effects of Remelting Processes on Porosity of NiCrBSi Flame Spray Coatings,
Surface Engineering, 32, 3, (2016), 238-243
(2015)
● A. RAFIEE, K. RAEISSI and M.A. GOLOZAR
Effect of pH on Nucleation Mechanism of Zn-Mn Coatings Electrochemical
Deposited at Different Deposition Potential,
Surface Engineering, 31, (2015) 439-445.
● M.FAZEL, H.R. SALIMIJAZI, M.A. GOLOZAR, and M.R. GARSIVAZ JAZI,
A Camparison of Corrosion, Tribocorrosion and Electrochemical Impedance
Properties of Pure Ti and Ti6Al4V alloy Treated by Micro-Arc Oxidation
Process.
Applied Surface Science, 324, (2015), 752-756.
• M. MORTAZAVI, A.S. KAKHKI, M.A. GOLOZAR, and H. TALAEI
Tracing Manufacturing Technique in Archaeological Thin Sheet Tube from
Tepe Sagsabad in Qazvin Plain, Iran (155-1800BC)
Mediterranean Archaeology and Archaeometry, 15, 1, (2015), 1-10.
• M.R. SARPOUSHI, M. NASIBI, M.R. SHISHESAZ, M.A. GOLOZAR and
H. RIAZI,
Graphite Nanosheets/ NanopoROUS Carbon Black/ Cerium Oxide Nanoparticles
as an Electrode Material for Electrochemical Capacitors,
Synthetic Metals, 200, (2015), 117-122.
• S. RAZAVI, S. KARBASI, M. MORSHED, H.Z. ESFAHANI, M.A. GOLOZAR
and S. VAEZIFAR,
Cell Attachment and Proliferation of Human Adipose-Derived Stem Cells on
PLGA/Chitosan Electrospum Nano-Biocomposite,
Cell Journal, 17, 3, (2015), 429-437.
• S. RAZAVI, H. ZARKESH ESFAHANI, M. MORSHED, S. VAEZIFAR
S. KARBASI and M.A. GOLOZAR,
Nanobiocomposite of Poly (lactide-co-glycolide)/Chitosan Electrospum Scaffold
Can Promote Proliferation and Transdifferentiation of Schwann-Like Cell from
Human Adipose-Derived Stem Cells.
Journal of Biomedical Materials research, Part A, 103, 8, (2015), 2628-2634.
• S. VAEZIFAR, S. RAZAVI, M.A. GOLOZAR, H. Z. ESFAHANI, M.
MORSHED and S. KARBASI,
Characterization of PLGA/Chitosan Electrospum Nano-Biocomposite Fabrication
by two Different Methods,
International Journal of Polymeric Materials and Polymeric Biomaterials, 64, 2,
(2015) 64-75.
(2014)
● M.R. GARSIVAZ JAZI, M.A. GOLOZAR, K. RAEISSI and M. FAZEL
Evaluation of Corrosion and Tribocorrosion of Plasma Electrolytic Oxidation
Treated Ti-6Al-4Ti Alloy,
Surface and Coating Technology, 244 (2014) 29-36.
● M.R. GARSIVAZ JAZI, M.A. GOLOZAR, K. RAEISSI and M. FAZEL
Surface Characteristics and electrochemical Impedance Investigation of Spark-
Anodize Ti-6Al-4V Alloy,
Journal of Materials Engineering and Performance, 23, (2014) 1270-1278.
● A. RAFIEE, K. RAEISSI and M.A. GOLOZAR,
Characterization and Corrosion Resistance of Zn-Mn Coatings
Electrodeposited from Acidic Chloride Bath,
Transactions of the Institute of Metal Finishing, 92, (2014) 115-120.
• M. MARDANI, R. BAGHERI and M.A. GOLOZAR
Influence of MA-g-HDPE Compatibilizer Content on Quality and
Adhesion/Bending Strength of Polyethylene /O-MMT Coating Films,
Journal of Applied Polymer Science, 131, 20, (2014), art. no. 40926.
• M. NASIBI, M. IRANKHAH, M.R. SARPOUSHI, M.A. GOLOZAR,
M. MOSHREFIFAR, and M.R. SHISHESAZ,
Graphite Nanosheet as an Electrode Material for Electrochemical Double Layer
Capacitors,
Materials Science in Semiconductors Processing, 20, 1, (2014), 49-54
● A. RAFIEE, R. RAEISSI, M.A. GOLOZAR,
Characterization and Corrosion Resistance of Zn-Mn Coatings Electrodeposited
from Acidic Chloride Bath,
Transactions of the Institute of Metal Finishing, 92, 2, (2014), 115-120.
• Z. AHMADIAN, I. DANAEE and M.A. GOLOZAR
Effect of Surface Treatment on Corrosion Resistance of 304 Stainless Steel
Implants in Tyrode Solution,
Archives of Metallurgy and Materials, 59, 1, (2014) 25-30.
• I. AGHAALI, M. FARZAM, M.A. GOLOZAR and I. DANAEE
The Effect of repeated Repair Welding on Mechanical and Corrosion Properties
of Stainless Steel 316L,
Materials and Design, 54, (2014), 331-341
• M. NASIBI, M.R. SARPOUSHI, R. HESAM, M.A. GOLOZAR,
M. MOSHREFIFAR,
Effect of Zirconium Oxide Nanoparticles on Surface Morphology and Energy
Storage of Electrochemical Capacitors,
Materials Science in Semiconductor Processing, 24, 1, (2014), 260-264.
• H.R. SALIMIJAZI, Z.R. MOUSAVI, M.A. GOLOZAR, J. MOSTAGHIMI
and T. COYLE,
Kinetic Study of the Solid State Transformation of Vacuum Plasma Sprayed
Ti-6Al-4V Alloy,
Journal of Thermal Spray Technology, 23, 1-2, (2014), 31-39.
• M.R. SARPOUSHI, M. NASIBI, M.A. GOLOZAR, M.R. SHISHESAZ,
M.R. BORHANI, S. NOROOZI,
Electrochemical Investigation of Graphene/Cerium Oxide Nanoparticles as an
Electrode Material for Supercapacitors,
Materials Science in Semiconductor Processing, 26, 1, (2014), 374-378.
(2013)
● F. SAMIEE, K. RAEISSI and M.A. GOLOZAR,
Nanoindentation Testing of Pulse Electrodeposited thin Zirconia Coatings,
Surface Engineering, 29, 10, (2013) 726-730.
● A. AGHAJANI, M.A. GOLOZAR, A. SAATCHI, K. RAEISSI, M. URGEN,
S. SHABANI, and L. BETOLINI,
Protecting Concrete Power Poles from Stray Alternating Current,
Materials Performance, 52, (2013) 30-32
● A. AGHAJANI, M.A. GOLOZAR, A. SAATCHI, K. RAEISSI, M. URGEN,
and S. SHABANI,
Stray Alternating Current and Environmental Effects on Concrete Power Poles,
Materials Performance, 54, (2013) 30-34.
● A. AGHAJANI, M.A. GOLOZAR, A. SAATCHI, K. RAEISSI, M. URGEN,
and S. SHABANI,
Stray Alternating Current Problems in Concrete Power Poles,
Materials Performance, 52, (2013) 36-39.
• S. REZAEE, G. R. RASHED, M.A. GOLOZAR,
Electrochemical and Oxidation Behavior of Yttria Stabilized Zirconia Coating
on Zircaloy-4 Synthesized via Sol-Gel Process,
International Jornal of Corrosion, (2013), art. No.453835,
• A. FATTAHI, K. SADRJAVADI, M.A. GOLOZAR, J. VARSHOSAZ,
M.H. FATHI, H. MIRMOHAMMAD-SADEGHI,
Preparation and Characterization of Oligochitosan-tragacanth Nanoparticles as
a Novel Gene Carrier,
Carbohydrate Polymer, 97, 2, (2013), 277-283,
• A. FATTAHI, P. PETRINI, F. MUNARIN, F. SHOKOOHINIA,
M.A. GOLOZAR, J. VARSHOSAZ, M.C. TANZI,
Polysaccharides Derived from Tragacanth as Biocampatible Polymer and Gels,
Journal of Applied Polymer Science, 129, 4, (2013), 2092-2102.
• Z. AHMADIAN, I. DANAEE and M.A. GOLOZAR,
Effects of Surface Treatment on Corrosion Resistance of 316 stainless Steel
Implant in Tyrode Solusion,
Materialpruefung/Materials Testing, 55, 4, (2013), 294-299
• M. NASIBI, M.A. GOLOZAR and G.RASHED,
Nano Iron Oxide (Fe2O3)/ Carbon Black Electrodes as an Electrode Material for
Electrochemical Capacitors: Effect of the Nanoparticles Dispersion Quality,
Materials Chemistry and Physics, 139, 1, (2013) 12-16.
• E. DARMIANI, I. DANAEE, M.A. GOLOZAR, M.R. TOROGHINEJAD
Corrosion Investigation of Al-SiC Nano-Composite Fabricated by Accumulative
Roll Bonding (ARB) Process,
Journal of Alloys and Compounds, 552, (2013), 31-39.
• M.NASIBI, M.A. GOLOZAR, G. RASHED,
Nanoporous Carbon Black Particles as an Electrode Material for Electrochemical
Double Layer Capacitors,
Materials Letters, 91, (2013), 323-325
• A. FATTAHI, M.A. GOLOZAR, J. VARSHOSAZ,
Retinoic Acid-Oligomeric Chitosan Micelles as Novel Gene Delivery Carrier;
in Vitro Transfection Study,
Journal of Reports in Pharmaceutical Sciences, 2, 2, (2013), 125-130.
• E. DARMIANI, I DANAEE, M.A. GOLOZAR, M.R. TOROGHNEJAD,
- ASHRAFI, A. AHMADI,
Reciprocating Wear Resistance of Al-SiC Nano-Composite Fabricated by Accumulative Roll Bonding Process,
Materials and Design, 50, (2013), 497-502.
(2012)
● S, KHOESAND, K. RAEISSI and M.A. GOLOZAR,
Electrochemical Aspects of Deposition and Characterization of Zink Coating
Produced in Presence of 1,2-diaminopropane in Sulphate Bath,
Transactions of the Institute of Metal Finishing, 90, (2012), 149-155.
• M. HABIBI RAD, M. AHMADIAN, M.A. GOLOZAR,
Investigation of the Corrosion Behavior of Wc-FeAl-B Composite in Aqueous
Media,
International Journal of Refractory Metals and Hard Materials, 35, (2012), 62-69.
• M. NASIBI, M. A. GOLOZAR, G. RASHED,
Nano Iron Oxide (Fe2O3)/Carbon Black Electrodes for Electrochemical
Capacitors,
Materials Letters, 85, (2012), 40-43,
• M. NASIBI, M. A. GOLOZAR, G. RASHED,
Nano Zirconium Oxide/Carbon Black as a new Electrode Material for
Electrochemical Double Layer Capacitors,
Journal of Power Sources, 206, (2012), 108-110.
• N. JOHARY, M.H. FATHI, M.A. GOLOZAR,
Fabrication, Characterization and Evaluation of the Mechanical Properties of
Poly (E-Caprolactone)/Nano-Fluoridated Hydroxyapatite Scafold for Bone Tissue
Engineering,
Composite Part B: Engineering, 43, 3, (2012), 1671-1675.
• N. JOHARY, M.H. FATHI, M.A. GOLOZAR, E. ERFANI and
- SAMADIKUCHEKSARAEI,
Poly (E-Caprolactone)/Nano-Fluoridated Hydroxyapatite Scafold for Bone Tissue
Engineering: In Vitro Degradation and biocompatibility Study,
Journal of Materials Science: Materials in Medicine, 23, 3, (2012), 763-770.
• F. TEHRANI, M.A. GOLOZAR, M.H. ABBASI, M. PANJEPOUR,
Characterization of Nanostructured High Nitrogen Fe-18Cr-xMn-4Mo Austenitic
Stainless Steel Prepared by Mechanical Alloying,
Materials Science and Engineering A, 534, (2012), 203-208,
• M. ESHRAGHI-KAKHKI, A. KERMANPOUR, M.A. GOLOZAR,
Three-Dimentional Simulation of Quenching Process of Plain Carbon Steel Gears
Incorporating Phase Transformations,
Materials Science and Technology, 28, 2, (2012), 197-204
• A. FATTAHI, M.A. GOLOZAR, J. VARSHOSAZ, H.M. SADEGHI,
M.H. FATHI,
Preparation and Characterization of Micelles of Oligomeric Chitosan Linked
to all-trans Retionic acid,
Carbohydrate Polymers, 87, 2, (2012) 1176-1184.
• N. JOHARY, M.H. FATHI, M.A. GOLOZAR,
The Effect of Fluorine Content on the Mechanical Proprties of Poly
(e-Caprolactone) / Nano-Fluoridated hydroxyapatite Scaffold for bone Tissue
Engineering,
Ceramics International, 37, 8, (2012), 3247-3251.
• E. ABEDI ESFAHANI, H. SALIMIJAZI, M.A. GOLOZAR, J. MOSTAGHIMI,
L. PERSHIN,
Study of Corrosion Behavior of Wire Arc Sprayed Aluminum Coating on Mild
Steel,
Journal of Thermal spray Technology. 21, 5, (2012), 1195-1202.
(2011)
● Z. GHAFERI, K. RAEISSI, M.A. GOLOZAR and H. EDRIS,
Characterization of Nanocrystalline Co-W Coatings on Cu Substrate,
Electrodeposited from a Citrate-Amonia Bath,
Surface and Coating Technology, 206, (2011), 497-505.
● S, KHORSAND, K. RAEISSI and M.A. GOLOZAR,
An Investigation on the Role of Texture and Surface Morphology in the
Corrosion Resistance of Zinc Electrodeposits,
Corrosion Science, 53, (2011), 2676-2678.
• F. TEHRANI, M.A. GOLOZAR, M.H. ABBASI, M. PANJEPOUR,
The effect of Particle Size of Iron powder on ɑ to ɣ Transformation in the
Nanostructured High Nitrogen Fe-Cr-Mn-Mo Stainless Steel Produced by
Mechanical alloying,
Materials Science and engineering A, 528, 12, (2011), 3961-3966.
● S, KHORSAND, K. RAEISSI and M.A. GOLOZAR,
Effect of oxalate Anions on Zink Electrodeposition from an Acidic Sulphate Bath,
Journal of the Electrochemical Society,158, (2011), D377-D383.
● F. SAMIIEE K. RAEISSI and M.A. GOLOZAR,
The effect of Heat Treatment Temperature on the structure and Barrier
Performance of a Zirconia coating Electrodeposited by Pulse Current,
Corrosion Science, 53, (2011) 1969-1975.
• M. ESHRAGH-KAKHKI, M.A. GOLOZAR and A. KERMANPOUR,
Application of Polymeric Quenchant in Heat Treatment of Crack Sensitive Steel
Mechanical Parts: Modeling and Experiments,
Materials and Desigh, 32, 5, (2011), 2870-2877.
● M. A. FARZANEH, M.R. ZAMANZAD-GHAVIDEL, K. RAEISSI,
M.A. GOLOZAR, A. SAATCI and S. KABI,
Effects of Co and w Alloying Elements on the Electrodeposition Aspects and
Properties of Nanocrystalline Ni alloy Coatings,
Applied Surface Science, 257, (2011) 5919-5926.
• S. VAHABZADEH, M.A. GOLOZAR, F. ASHRAFIZADEH,
Effect of Annealing on Microstructure of CuO-Doped (Zr0.85 Sn0.2)TiO4
Journal of Alloys and Compounds, 509, 4, (2011), 1129-1132.
• S.M. LATIFI, M.H. FATHI, M.A. GOLOZAR,
Preparation and Characterization of Bioactive Hydroxyapatite-Silica Composite
Nanopowders via Sol-Gel Method for Medical applications,
Advances in Applied Ceramics, 110, 1, (2011), 8-14.
(2010)
● O. ABOUTALEBI, A. KERMANOUR, M.R. SHISHESAZ and M.A. GOLOZAR,
Optimizing the Electrode position in Sacrificial Anode Cathodic Protection
Systems Using Boundary Element Method.
Corrosion Science, 52, (2010) 678-687
● S. GHAZIOF, K. RAEISSI, and M.A. GOLOZA,
Improving the Corrosion Performance of Cr-C Amorphous Coating on Steel
Substrate by Modifying the Steel Surface Preparation,
Surface and Coating Technology, 205, (2010) 2174-218
● S. GHAZIOF, M.A. GOLOZAR, and K. RAEISSI,
Characterization of as Deposited and Annealed Cr-C Alloy Coatings Produced from
a Trivalent Chromium Bath,
Journal of Alloys and Compounds, vol. 496 (2010) 164-168.
● M. ADELI, K. RAEISSI, and M.A. GOLOZA,
Corrosion Inhibition of 2205 Duplex Stainless Steel in Acetic Acid Solution by
Nitrite Anions,
Corrosion, 66, (2010), 0750021-0750028
● Z. GHAFERI, K. RAEISSI, M.A. GOLOZAR, A. SAATCHI and S. KAB
Comparison of Electrodeposition Aspects and Characteristics of Ni-W and Co-
Alloy Nanocrystalline Coatings,
Iranian Journal of Materials Science and Engineering, 7, (2010), 16-24.
● M. ADELI, M.A. GOLOZA and K. RAEISSI,
Pitting Corrosion of SAF2205 Duplex Stainless Steel in Acetic Acid Containing
Boromide and Chloride,
Chemical Engineering Communications, 197, (2010), 1404-1416
● J. ALJOURANI, M.A. GOLOZAR, and K. RAEISSI,
The Inhibition of Carbon Steel Corrosion in Hydrochloric and Sulfuric Acid Media
Using Some Benzimidazole Derivatives,
Materials Chemistry and Physics, 121, (2010), 320-325.
• Z. NIKSERESHT, F. KARIMZADEH, M.A. GOLOZAR, M. HEIDARBEIGY,
Effect of Heat Treatment on Microstructure and Corrosion Behavior of Al6061
Alloy Weldment,
Materials and Design, 31, 5, (2010), 2643-2648.
● A. FATTAH-ALHOSSEINI, A. SAATCHI, M.A. GOLOZAR, and K. RAEISSI,
The Passivity of AISI316 Stainless Steel in 0.05 M H2SO4,
Journal of Applied Electrochemistry, 40, (2010) 457-461
● M. A. FARZANEh, K. RAEISSI and M.A. GOLOZAR
Effect of Current Density on deposition Process and Properties of
Nanocrystalline Ni-Co-W Alloy Coatings,
Journal of Alloys and Coatings, 489, (2010), 488-492.
● A. FATTAH-ALHOSSEINI, M.A. GOLOZAR, A. SAATCHI and K. RAEISSI
Effect of solution Concentration on Semiconducting Properties of Passive Film
Formed on Austenitic Stainless Steels,
Corrosion Science, 52, (2010), 205-209.
(2009)
● K. RAEISSI and M.A. GOLOZAR,
Passivation Behavior of Carbon Steel in Hydrogen Sulfide-Containing
Diethanolamine and Diglycolamine Solutions,
Corrosion, 65, (2009), 595-600
● J. ALJOURANI, K. RAEISSI and M.A. GOLOZAR
Benzimidazole and its Derivatives as Corrosion Inhibitors for Mild Steel in
1M HCl Solution,
Corrosion Science, 51, (2009), 1836-1843.
● E. SETARE, K. RAEISSI, M.A. GOLOZAR, M.H. FATHI
The Structure and Corrosion Barrier Performance of Nanocrystalline
Zirconia Electrodeposited Coating,
Corrosion Science, 51, (2009), 1802-1808.
● A. FATTAH-ALHOSSEINI, A. SAATCHI, M.A. GOLOZAR, and K. RAEISSI
The Transpassive Dissolution Mechanism of 316L Stainless Steel,
Electrochemica Acta, 54, (2009), 3645-3650.
● SH. HASSANI, K. RAEISSI, M. AZZI, D. LI, M.A. GOLOZAR and J.A.
SZPUNAR,
Improving the Corrosion and Tribocorrosion Resistance of Ni-Co Nanocrystalline
Coating in NaOH Solution.
Corrosion Science, vol. 51 (2009) pp. 2371-2379
● M. ESHRAGHI KAKHKI, A. KERMANPUR and M.A. GOLOZAR ,
Numerical Simulation of Continuous Cooling of a Low Alloy Steel to Predict
Microstructure and Hardness.
Modeling and Simulation in Materials Science and Engineering, Vol.17, (2009),
● A. AKHBARIZADEH, M.A. GOLOZAR, A. SHAFEIE and M.KHOLGHY,
Effects of Austenitizing Time on Wear Behavior of D6 Tool Steel after Deep
Cryogenic Treatment.
Journal of Iron and Steel Research Institute, vol. 16(6), (2009), 29-32.
• H. ASGARI, M.R. TOROGINEJAD, and M.A. GOLOZAR,
Effect of Coating Thickness on Modifying the Texture and Corrosion Performnce
of Hot-dip Galvanized Coatings,
Current Applied Physics, Vol.9, (2009), 59-66.
● A. AKHBARIZADEH, A. SHAFYEI and M.A, GOLOZAR.
Effects of Cryogenic Treatment on Wear Behavior of D6 Tool Steel.
Materials and Design, 30, 8, (2009), 3259-3264.
• M.E. KAKHKI, A. KERMANPOUR, M.A. GOLOZAR,
Numerical Simulation of Continuous Cooling of a Low Alloy Steel to Predict
Microstructure and Hardness,
Modelling and Simulation in Materials Science and Engineering, 17, 4,
art. no. o45007, (2009).
• T. HAGHIR, M.H. ABBASI, M.A. GOLOZAR, M. PANJEPOUR,
Investigation of ɑ to ϒ Transformation in the Production of a Nanostructured
High-Nitrogen Stainless Steel Powder via Mechanical Alloying,
Materials Science and engineering A, 507, 1-2, (2009), 144-148.
• A. ASHRAFI, M.A. GOLOZAR, S. MALAKPOUR,
Corrosion Behavior of 316L Stainless Steel Coated by Amorphous and
Semicrystalline Polypyrole,
Surface Engineering, 25, 2, (2009), 120-126.
(2008)
● K. RAEISSI, A. SAATCHI, M.A. GOLOZAR, A. TUFANI and J.A.
SZPUNAR,
The Effect of Electrochemical Adsorbents on Texture and Morphology
Development during Zinc and Zinc-Cobalt Electrodepositions,
Electrochemica Acta, 53, (2008), 4674-4678.
● O. MIRZAEE, A. SHAFYEI, M.A.GOLOZAR and H.SHOKROLLAHI,
Influence of MoO3 and V2O5 Co-Doping on the Magnetic Properties and
Microstructure of Ni-Zn Ferrite.
Journal of Alloys and Compounds, vol.461, (2008), 312-315.
• H.ASGARI, M.R. TOROGHINEJAD and M.A. GOLOZAR,
The role of texture and Microstructure in Optimizing the Corrosion Behavior of Zinc Hot-dip Coated Steel Sheet,
ISIJ International, Vol. 48, (2008), pp. 628-633.
• H. ASGARI, M.R. TOROGHINEJAD and M.A. GOLOZAR
Relationship between (00.2) and (20.1) Texture Components and Corrosion
Resistance of Hot-Dip Galvanized Zinc Coatings,
Journal of Materials Processing Technology, 198, 1-3, (2008), 54-59
• N. ATTARZADEH, K.RAEISSI, and M.A. GOLOZAR,
Effect of Saccharin addition on the Corrosion Resistance of Polypyrrole Coatings,
Progress in Organic Coatings,
Vol. 63, (2008), pp. 167-174.
• SH.HASSANI, K. RARISSI, and M.A. GOLOZAR ,
Effects of Saccharin on the Electrodeposition of Ni-Co Nanocrystalline Coatings,
Journal of Applied Electrocemistry.
Vol.38, (2008), pp.689- 694.
• A. Ashrafi, M.A. GO LOZAR, S. Mallakpour,
EIS investigation of passive film formation on mild steel in oxalic acid solution,
Journal of Applied Electrochemistry, Vol. 38, No. 2 (2008), pp. 225-229.
• K. RAEISSI, A. SAATCHI, M.A. GOLOZAR, A. TUFANI, J.A. SZPUNAR,
The Effect of Electrochemical Adsorbates on Texture and Morphology Development During Zinc and Zinc-Cobalt Electrodepositions,
Electrochimica Acta, 53, 14, (2008), 4674-4678.
• O. MIRZAEE, M.A. GOLOZAR, A. SHAFYEI,
Influence of V2O5 as an Effcetive Dopant on the Microstructure Development
and Magnetic Properties of Ni0.64ZnO0.36Fe2O4 Soft Ferrites,
Materials Characterization, 59, 5, (2008), 638-641.
● K. RAEISSI, A. TUFANI, A. SAATCHI, M.A. GOLOZAR and J.A. SZPUNAR,
Texture and Surface Morphology Development in Zink and Zink-Cobalt Electrodeposits,
Journal of the Electrochemical Society, vol.155 no. 12, (2008) D783-D790.
• S. Tahamtan, M. A. GOLOZAR, F. Karimzadeh, B. Niroumand,
Microstructure and Tensile Properties of Thixoformed A356 Alloy,
Materials Characterization, 59, 3, (2008), 223-228.
(2007)
• H. Asgari, M.R. Toroghinejad and M. A. GOLOZAR
Relationship between (00.2) and (20.1) texture components and corrosion resistance of hot-dip galvanized zinc coatings
Journal of Materials Processing Technology
Vol.19B, (2007), pp. 54-59.
• K. Raeissi, A. Saatchi, M. A. GOLOZAR, J. A. Szpunar,
AFM study of morphological development of zinc electrodeposits,
Surface Engineering, Vol.23, No.4, (2007), pp.300-306
• H. Asgari, M. R. Toroghinejad, M. A. GOLOZAR,
On Texture, Corrosion Resistance and Morphology of Hot-Dipped Galvanized Zinc Coatings,
Applied Surface Science, Vol.253, No.16, 15, (2007), pp.6769-6777
(2006)
• M. A. GOLOZAR, J. Mostaghimi, T .W. Coyle
Wear Resistance of Nanostructured and Conventional Yttria-Stabilized Zirconia Coatings,
Iranian Journal of Materials Science and Technology, Vol. 3, No. 1, 2, (2006), pp.32-38
• M. A. GOLOZAR, J. Mostaghimi, T. W. Coyle
Wear Behavior of Nanostructured and Conventional 8wt%Y2O3-ZrO2 Coatings against Si3N4 Ball,
Surface Engineering, Vol. 22, No. 5, (2006), pp.399-407
• A. Ashrafi, M. A. GOLOZAR, S. Mallakpour
Morphological Investigations of Polypyrrole Coatings on Stainless Steel,
Synthetic Metals, Vol.156, (2006), pp.1280-1285
• R. Raeissi, M. R. Bateni, A. Saatchi, M. A. GOLOZAR, J. A.Szpunar
The effect of γ-fiber Texture Intensity of Carbon Steel Substrate on Zinc Hetro-Epitaxial Growth.
Surface and Coating Technology, Vol.201, (2006) pp.3116-3122
(2005)
• R. RAIESSI, A. SAATCHI, M. A. GOLOZAR, J.A.SZPUNAR
Effect of Surface Preparation on Zinc Electrodeposited Texture,
Surface and Coatings Technology, Vol.197, (2005), pp.229-237
• A. Ghasemi, F. Ashrafizadeh, M. A. GOLOZAR
Optimization of Processing Parameters on the Formation of Silica Coating on Nickel Substrates by Sol-Gel Processing
Surface Engineering, Vol. 21, No. 2, (2005), pp.131-138.
• R. RAIESSI, M. A. GOLOZAR, A. SAATCHI, J.A.SZPUNAR
The effect of Texture on the Corrosion Resistance of Zinc Electrodeposots,
Transactions of the Institute of Metal finishing, 83, 2. (2005), 99-103
• A. Bahrami, S. H. Mousavi Anijdan, M. A. GOLOZAR, M. Shamanian, N. Varahram
Effects of Conventional Heat Treatment on the wear Resistance of AISI H13 Tool Steel
Wear, Vol.258, (2005), pp.846-851
(2004)
• A. GHASEMI, F. ASHRAFIZADEH, M. A. GOLOZAR, R. MOZAFFARINIA, M. H. YOUSEFI,
Effect of Acid and Bases on the Structure of Silica Thick Film Produced by Sol-Gel Processing
Interceram, Vol. 53, No. 5, (2004), pp.324-327
• R. RAIESSI, A. SAATCHI, M. A. GOLOZAR, J. A. SZPUNAR
Texture and Surface Morphology in Zinc Electrodeposits
Journal of Applied Electrochemistry,
Vol. 34, (2004), pp. 1249-1258
• M. FAZEL NAJAFABADI, and M. A. GOLOZAR
In-situ Fabrication of Al-TiC Composites by Slag Process
Iranian Journal of Materials Science and Engineering,
Vol. 1, No. 2, pp. 39-43, 2004.
• A. ASHRAFI, M.A.GOLOZAR, and S. MALAKPOUR
Electropolymerization of Pyrrole and N-Methylpyrrole on Mild Steel Surface, International Iranian Polymer Journal, Vol. 13, No. 5, pp. 485-490, 2004.
• A. ASHRAFI, M.A.GOLOZAR, S. MALAKPOUR, A. GHASEMI
Effect of Pyrrole and N-methylpyrrole Coatings on Corrosion Resistance of
Mild steel,
Cailiao Rechuli xuenao/transactions of Materials and Heat Treatment, 25, 5, (2004), 1137-1141.
(2003)
• R. RAIESSI, A. SAATCHI, and M. A. GOLOZAR
Nucleation and Growth of Zinc Electrodeposited onto Electropolished and Mechanically Polished Steel Surfaces.
Transactions of the Institute of Metals Finishing, Vol. 82, No. 6, pp. 186-189, 2003
• M. F. NAJAFABADI, M. A. GOLOZAR, A. SAIDI, and H. EDRIS
Wear Behaviour of Aluminum Matrix TiB2 Composite Prepared by In-situ Processing.
Materials Science and Technology, Vol. 19, 2003.
• A. ASHRAFI, M.A. GOLOZAR, S. MALAKPOUR,
Electropolymerization of Pyrrole and N-Methylpyrrole on Mild steel Surface.
Iranian Polymer Journal (English Edition), 12, 6, (2003), 485-490.
• R. RAIESSI, A. SAATCHI, and M. A. GOLOZAR
Effect of nucleation Mode on the Morphology and Texture of Electrodeposited Zinc.
Journal of Applied Electrochemistry, Vol. 33, pp. 635-642, 2003
(2002)
• R. MOZAFFARINIA, F. ASHRAFIZADEH and M.A. GOLOZAR
SiO2 Optical Layer Containing ZnO Microparticles Produced by Sol-Gel Method Interceram, International Ceramic Review, Vol. 51, (2002), pp. 416-419,.
• R. MOZAFFARINIA, F. ASHRAFIZADEH and M. A. GOLOZAR
SiO2/SiO2-ZnO Optical Multilayer Coatings, Fabricated by the Sol-Gel Method, Surface Engineering, Vol. 18, No. 4, (2002), pp. 305-308,
• R. BAGHERI, M. A. GOLOZAR, and M. ETESSAMI
Fluidized Bed Polyethylene Powder Coatings on Carbon Steel: A Study of Effective Parameters on Adhesion
International Journal of Engineering, Iran University of Science and Technology, Vol. 13, No. 2, (2002) pp. 1-12,
• M. A. GOLOZAR, H.R. HABIBI
Microstructural Characterization of Combustion Deposited Diamond Crystals and Films
International Journal of Engineering, National Center for Scientific Research, Islamic Republic of Iran,Vol. 15, No. 3, (October 2002)
(2001 and Before)
• M. A. GOLOZAR
Effects of Boronising on Fatigue Life of Plain Carbon and Low Alloy Cr-Mo Steels
Journal of Surface Engineering, Vol. 17, No. 1, (2001), pp. 61-65
• M. A. GOLOZAR
Optimizing the Microstructure and Mechanical Properties of As Cast Hot Rolling Sleeves by Heat Treatment
Journal of Materials and Manufacturing Process, Vol. 15, No. 11, (2000). pp. 377-394
• M. A. GOLOZAR and R. BAGHERY
High Density Polyethylene Coating on Carbon Steel Produced By Electrostatic Powder Spray System
Journal of Applied Polymer Science, Vol. 70, , (1998)pp. 2507-2513
• M. A. GOLOZAR, I. R. McCOLL, J.V. WOOD
Nucleation and Growth of Diamond and Diamond-Like Coatings Produced by Torch Technique
Iranian Journal of Science and Technology, Vol. 19, No. 1, Transaction A, (1996), pp. 67-78.
• M. A. GOLOZAR, A. NAJAFIZADEH
Structural and Mechanical Characterization of Austempered Cu-Sn Ductile Iron Alloys
Journal of Engineering, Islamic Republic of Iran, Vol. 5, Nos. 1 & 2, (May 1992), pp. 39-48
• M. A. GOLOZAR, A. R. RIAHI
Blistering Phenomenon in Zirconium and Zirconium Alloys
Corrosion Science, Vol. 35, No. 1-4, (1993), pp. 565-570
• D. M. GRANT, I. R. McCOLL, M. A. GOLOZAR, J. V. WOOD, N. St J. BRAITHWAITE
Plasma Assisted CVD for Biomedical Applications
Diamond and Related Materials, No.1, (1992), pp.727-730
• M. A. GOLOZAR, I. R. McCOLL, D. M. GRANT, J. V. WOOD
Combustion Flame Grown Diamond Films
Diamond and Related Materials, No. 1, (1992), pp. 262-269
• M. A. GOLOZAR
Fractographic Aspects of Stress Corrosion Failure of Zircaloy-2 in Methanol/Hydrochloric Acid Solutions
Journal of Engineering, Islamic Republic of Iran, Vol. 3, Nos. 1 & 2 May. (1990), pp. 23-29
• M. A. GOLOZAR, J. C. SCALLY
The Effect of Loading Mode on The Stress Corrosion Cracking of Zircalloy-2 in Methanol/Hydrochloric Acid Solution,
Corrosion Science, Vol. 22, No. 11, (1982), pp. 1015-1025